eprom-corrado/drivers/model-records/27C256.md · 43 line(s) · markdown
Model record — 27C256 (Corrado ECU EPROM)
Per-device record for the standard Corrado engine-ECU memory part, using the
TERMINOLOGY.md value classes (Actual / Assumption / Default / Unknown).
Identity
| Property | Value | Class |
| Device | 27C256 | Actual |
| Organisation | 32768 × 8 (256 Kbit) | Actual |
| Package | 28-pin DIP, socketed on the ECU board | Actual |
| Supply | +5 V, TTL-level programming | Actual |
| Erase | UV-erasable; often one-time-programmable | Actual |
Host-image mapping
| Property | Value | Class |
| Image size | 32768 bytes | Actual |
| Blank cell | 0xFF | Actual |
| Checksum | trailing 2-byte little-endian word (16-bit reconciliation) | Actual |
| Reference images | Corrado/eproms/G60_StockEprom_REFERENCE.bin (checksum16 0x60A0), .../VR6_...bin (0xE41C) | Verified (software) |
Operations
| Verb | Supported | Note |
| read / backup | Yes | chip → image / file |
| write (+verify) | Yes | program then read-back verify |
| verify | Yes | compare chip to a file |
| blank-check | Yes | confirm all 0xFF |
| checksum | Yes | file-only; no hardware needed |
| erase | Conditional | UNSUPPORTED on genuine UV/OTP 27C256 (use a UV eraser); succeeds only on reusable pin-compatible replacements |
Evidence boundary
The read/write/verify/checksum paths are verified in software against the
reference images and the fake backend. Live-chip programming of a physical
27C256 is not recorded here; see ../../docs/COMPLETENESS.md. Do not treat
the TL866 bulk framing as a verified hardware value until checked against a
physical unit.