# Model record — 27C256 (Corrado ECU EPROM) Per-device record for the standard Corrado engine-ECU memory part, using the `TERMINOLOGY.md` value classes (Actual / Assumption / Default / Unknown). ## Identity | Property | Value | Class | |----------|-------|-------| | Device | 27C256 | Actual | | Organisation | 32768 × 8 (256 Kbit) | Actual | | Package | 28-pin DIP, socketed on the ECU board | Actual | | Supply | +5 V, TTL-level programming | Actual | | Erase | UV-erasable; often one-time-programmable | Actual | ## Host-image mapping | Property | Value | Class | |----------|-------|-------| | Image size | 32768 bytes | Actual | | Blank cell | 0xFF | Actual | | Checksum | trailing 2-byte little-endian word (16-bit reconciliation) | Actual | | Reference images | `Corrado/eproms/G60_StockEprom_REFERENCE.bin` (checksum16 0x60A0), `.../VR6_...bin` (0xE41C) | Verified (software) | ## Operations | Verb | Supported | Note | |------|-----------|------| | read / backup | Yes | chip → image / file | | write (+verify) | Yes | program then read-back verify | | verify | Yes | compare chip to a file | | blank-check | Yes | confirm all 0xFF | | checksum | Yes | file-only; no hardware needed | | erase | **Conditional** | UNSUPPORTED on genuine UV/OTP 27C256 (use a UV eraser); succeeds only on reusable pin-compatible replacements | ## Evidence boundary The read/write/verify/checksum paths are verified in software against the reference images and the fake backend. Live-chip programming of a physical 27C256 is **not** recorded here; see `../../docs/COMPLETENESS.md`. Do not treat the TL866 bulk framing as a verified hardware value until checked against a physical unit.