Sun UltraSPARC Architecture
Topology
SLSunUltraSPARCCPU
-> SLClock -> SLRegisterFile -> SLALU -> SLInstructionDecoder -> SLIOBus -> SLIOTiming -> SLInterruptController
Register section
The architectural register section is a RISC general-purpose register file: SPARC V9 register windows (global + windowed in/out/local), g0 hardwired zero.
Internal latches and datapath elements are modeled only where their observable timing or behavior is useful.
Control section
The control side is represented as:
- instruction register;
- instruction decode;
- control/timing sequencer;
- interrupt logic;
- clock coordination.
Datapath
registers -> internal bus/latches -> ALU -> register/memory destination
Address formation uses the architectural 44-bit address path.
Bus
The external interface exposes 44 address lines, a 64-bit data path, read/write control, clock/phase signals, and reset/interrupt controls. Each observable memory transaction is modeled as a bus event (see BUS.md).
Design principle
The SLeeLa representation is compositional: a Sun UltraSPARC variant replaces only the couplers, I/O, timing, cache or opcode components that differ, rather than duplicating the whole CPU hierarchy.
Sources
- https://en.wikipedia.org/wiki/UltraSPARC
- https://en.wikipedia.org/wiki/SPARC