# Sun UltraSPARC Architecture ## Topology SLSunUltraSPARCCPU -> SLClock -> SLRegisterFile -> SLALU -> SLInstructionDecoder -> SLIOBus -> SLIOTiming -> SLInterruptController ### Register section The architectural register section is a RISC general-purpose register file: SPARC V9 register windows (global + windowed in/out/local), g0 hardwired zero. Internal latches and datapath elements are modeled only where their observable timing or behavior is useful. ### Control section The control side is represented as: - instruction register; - instruction decode; - control/timing sequencer; - interrupt logic; - clock coordination. ### Datapath registers -> internal bus/latches -> ALU -> register/memory destination Address formation uses the architectural 44-bit address path. ### Bus The external interface exposes 44 address lines, a 64-bit data path, read/write control, clock/phase signals, and reset/interrupt controls. Each observable memory transaction is modeled as a bus event (see BUS.md). ## Design principle The SLeeLa representation is compositional: a Sun UltraSPARC variant replaces only the couplers, I/O, timing, cache or opcode components that differ, rather than duplicating the whole CPU hierarchy. ## Sources - https://en.wikipedia.org/wiki/UltraSPARC - https://en.wikipedia.org/wiki/SPARC