Cortex-M Circuit-Level Abstraction
Scope
This document defines a logical digital abstraction for simulation and teaching. It is not a transistor-level netlist or a claim about a specific vendor's silicon.
Functional blocks
- Thumb instruction fetch/decode and execution control.
- General-purpose register bank and status/exception state.
- Arithmetic/logic and optional DSP/FPU/MVE units.
- Exception interface and NVIC-facing signals.
- Configurable memory interface, optional MPU and cache blocks.
- Optional debug/trace, security attribution, and implementation-defined blocks.
Signal-level concepts
Represent clock/reset, instruction/data request and response, exception/interrupt inputs, fault outputs, and bus handshakes at the abstraction level needed by the simulator. Exact signal names and timing are implementation-specific.
Optionality
FPU, DSP, MVE, TrustZone-M, MPU, caches, and debug/trace must be conditionally instantiated. DMA and most peripherals belong to the SoC diagram, not the core schematic.
Validation
Circuit abstraction must remain consistent with the selected architecture profile. Do not infer gate count, transistor count, physical timing, or power figures without a documented implementation source.