# Cortex-M Circuit-Level Abstraction ## Scope This document defines a logical digital abstraction for simulation and teaching. It is not a transistor-level netlist or a claim about a specific vendor's silicon. ## Functional blocks - Thumb instruction fetch/decode and execution control. - General-purpose register bank and status/exception state. - Arithmetic/logic and optional DSP/FPU/MVE units. - Exception interface and NVIC-facing signals. - Configurable memory interface, optional MPU and cache blocks. - Optional debug/trace, security attribution, and implementation-defined blocks. ## Signal-level concepts Represent clock/reset, instruction/data request and response, exception/interrupt inputs, fault outputs, and bus handshakes at the abstraction level needed by the simulator. Exact signal names and timing are implementation-specific. ## Optionality FPU, DSP, MVE, TrustZone-M, MPU, caches, and debug/trace must be conditionally instantiated. DMA and most peripherals belong to the SoC diagram, not the core schematic. ## Validation Circuit abstraction must remain consistent with the selected architecture profile. Do not infer gate count, transistor count, physical timing, or power figures without a documented implementation source.