Home /Modules/wi-fi-6/TECHNICAL-SPECIFICATIONS.md

TECHNICAL-SPECIFICATIONS.md

wi-fi-6/TECHNICAL-SPECIFICATIONS.md · 58 line(s) · markdown

Wi-Fi 6 — Known Specifications And Technical Details

Identity And Standards Basis

Wi-Fi 6 and Wi-Fi 6E use 802.11ax capabilities. A 6 GHz-capable product is commonly described as Wi-Fi 6E; 6 GHz availability, power rules, and indoor/outdoor permissions vary by jurisdiction.

Known Technical Capabilities

Peak Data Rate — Important Qualification

The often-quoted maximum theoretical PHY rate is approximately 9.6 Gbit/s, based on an eight-spatial-stream, 160 MHz configuration and the highest supported modulation/coding assumptions. This is not typical single-client application throughput. Actual speed depends on client capability, channel width, signal quality, contention, interference, access-point scheduling, wired backhaul, and protocol overhead.

Bands And Regulatory Constraints

Wi-Fi 6 on 2.4/5 GHz should be distinguished from Wi-Fi 6E, which enables 6 GHz operation. 6 GHz can provide additional spectrum and wider channels, but range, penetration, permitted power, and indoor/outdoor rules differ. Available channels and power levels are country-specific. Software should obtain supported capabilities from the OS/driver and must not hard-code a universal channel plan.

Security And Interoperability

Wi-Fi 6 itself does not mean every network is configured securely. Wi-Fi 6 certification programs commonly require WPA3 support for Wi-Fi 6 devices, but actual network security still depends on device certification, configuration, and enabled mode. Prefer WPA3-Personal or WPA3-Enterprise where possible; use WPA2-AES only where compatibility requires it and the equipment supports it. Avoid WEP and WPA/TKIP. Secure application traffic independently with modern TLS and correct certificate validation.

SLeeLa Implementation Notes

This document records known standard-level capabilities and does not claim that SLeeLa implements an 802.11ax PHY/MAC or Wi-Fi 6 certification. OFDMA scheduling, MU-MIMO, BSS coloring, and radio power-save behavior require compatible radios, firmware, drivers, and access-point/client cooperation; they are not features that a typical user-space application can independently enable through ordinary sockets.

For SLeeLa, prioritize platform network APIs, robust reconnection, DNS and route error handling, secure transport, connection diagnostics, and tests under congestion. Report negotiated link information only when the platform exposes it, and distinguish it from end-to-end throughput.

Verification Checklist

References


Status: Research reference. Verify the applicable IEEE normative text, Wi-Fi Alliance certification requirements, local regulatory rules, and actual hardware support before implementation.