Home/Modules/us-infrastructure

us-infrastructure

system module us-infrastructure

<img align="right" src="https://github.com/mearvk/SLeeLa/blob/master/images/debian/debian-logo.png" width="75" height="75" alt="SLeeLa">

<img src="https://github.com/mearvk/SLeeLa/blob/master/images/sleela/sleela-logo-004.jpg" alt="SLeeLa">

US Infrastructure — Economic Model

A small, transparent economic model of United States infrastructure: what each sector represents, how investment in it flows into the economy, and how a renewal backlog accumulates when reinvestment lags depreciation. The model is written in SLeeLa (syntax 1.2) and leans on two existing pieces of this repository:

Method note (Part B discipline). Following this repository's evidentiary rule (METAPHOR ≠ FACT, ASSOCIATION ≠ CAUSATION), every numeric input in this model is illustrative / placeholder unless it carries an explicit, dated primary source. A model output is a computation over assumptions, not an empirical measurement or a forecast. See SOURCES.md.


1. What the model is

The model treats US infrastructure as a set of sectors (roads & bridges, transit, water, energy grid, aviation, rail, broadband, …). For each sector it carries a few economic quantities and derives a few results. It answers questions of the form:

These are the classic public-infrastructure economics relationships, kept deliberately explicit so the assumptions are visible.

2. Data model (structs)

Each sector is a Sector record; a scenario bundles the shared macro assumptions. (See model.sleela for the runnable definitions.)

struct Sector {
    String name;          // e.g. "Roads & Bridges"
    double assetBase;     // estimated replacement value of in-service assets ($B)
    double annualInvest;  // actual annual investment into the sector ($B/yr)
    double depreciation;  // annual depreciation rate of the asset base (fraction)
    double conditionIdx;  // 0..1 condition proxy (1 = state of good repair)
    double bcRatio;       // benefit-cost ratio of marginal investment (unitless)
}

struct Scenario {
    String label;         // scenario name
    double multiplier;    // output multiplier on infrastructure spend (Y per $)
    double discountRate;  // real discount rate for NPV (fraction/yr)
    int    horizonYears;  // evaluation horizon
}

3. Relationships computed

All formulas are stated so a reader can check them; the SLeeLa program computes exactly these.

ResultFormulaMeaning
Output contributioncontribution = annualInvest × multiplierSpend times the assumed multiplier (a modelled effect, not a measured one).
Required renewalrenewalNeed = assetBase × depreciationAnnual reinvestment needed just to hold the asset base steady.
Backlog changebacklogDelta = renewalNeed − annualInvestPositive ⇒ the backlog grows this year; negative ⇒ it shrinks.
Investment gapgap = max(0, backlogDelta)The annual shortfall against a state-of-good-repair path.
Marginal NPVNPV = Σ_{t=1..H} (annualInvest × (bcRatio − 1)) / (1+r)^tPresent value of net benefits of the marginal spend over the horizon.
National rollupΣ contribution, Σ gap, Σ NPVProgram totals across all sectors.

The GDP identity Y = C + I + G frames where infrastructure investment sits: public infrastructure spend is part of I (and, for government capital, G). The model reports the sector contribution as a component estimate, not a claim about the whole economy.

4. Assumptions vs. facts

The model separates three layers explicitly, matching ECONOMICS.md's `observation → measurement → accounting identity → behavioral model → estimate → interpretation` chain:

  1. Identities (true by definition): Y = C + I + G; `backlogDelta = renewalNeed − annualInvest`. These hold regardless of data quality.
  2. Behavioral assumptions (hypotheses): the spending multiplier and each sector's bcRatio. Reasonable ranges are discussed in SOURCES.md; the defaults in the program are round, conservative placeholders.
  3. Data (must be sourced): assetBase, annualInvest, depreciation, conditionIdx. The committed values are illustrative placeholders; swap in sourced figures (with dates) before drawing any real conclusion.

5. Files

FileWhat it is
model.sleelaThe runnable SLeeLa model (structs + identities + rollup).
sectors.csvIllustrative per-sector inputs with a provenance column.
SOURCES.mdWhere real figures come from, and the assumption ranges, kept apart from framing.

6. Running it

The model is an ordinary SLeeLa program. From the repository root, with the verified-build manifest configured (see ../security/BUILD-VERIFICATION.md):

export SLEELA_SHA256_MANIFEST=security/sha256-manifest.json
export SLEELA_SHEET=SHEET.sheet
impl/build/sleela run us-infrastructure/model.sleela

This model is a descriptive, transparent computation. It asserts no official status and no forecast; its outputs are only as good as the assumptions and sourced data supplied to it.


SLeeLa

<p align="center"><img src="images/sleela/sleela-wordmark.svg" alt="SLeeLa — The Now. The Ingredient." width="560"></p> <p align="center"><img src="https://github.com/mearvk/SLeeLa/blob/master/images/sleela-programming-language-002.jpg" alt="SLeeLa Marketing Logo" width="560"></p>

Files 3