SLeeLa SLeeLa # SLeeLa Server Participation Each SLeeLa Server Edition may participate in a fast regroup round one or a few times per day. ## Behavior 1. Read the explicitly configured known SLeeLa servers from known-servers.conf. 2. Send a small SLEELA-MESH/1 HELLO message to all configured peers concurrently. 3. Wait for each configured peer's bounded response window. 4. Record response/no-response status without retaining peer IP addresses in the participation record. 5. Regroup after the round and continue normal server operation. 6. Repeat according to SLEELA_MESH_INTERVAL_SECONDS; the default is every 8 hours (three rounds per day). The participation layer is bounded and explicit. It does not discover or scan arbitrary Internet addresses. A peer must be placed in the known-server configuration before it is contacted. ## Transport The default participation port is TCP 22221. This is separate from: - 2222 — basic probe - 22220 — basic scan/service discovery - 19866 — SLeeLa native server port - 20000 — external International Strernary reference The participation layer does not change the existing SLeeLa logical HTTP port namespace. ## Message and regroup The initial message contains only protocol/version, configured node identifier, UTC time, and participation port. Responses are bounded to the configured timeout. This is a coordination mechanism, not an authority mechanism. A participation response does not by itself establish legal, governmental, diplomatic, financial, identity, or safety authority. ## Configuration Environment variables: - SLEELA_MESH_PEERS_FILE - SLEELA_MESH_PORT (default 22221) - SLEELA_MESH_INTERVAL_SECONDS (default 28800) - SLEELA_MESH_TIMEOUT_SECONDS (default 5) - SLEELA_MESH_MAX_PEERS (default 64) - SLEELA_SERVER_NODE_ID round performs one immediate round. start runs repeated rounds. stop stops the participation daemon.