# SLeeLa AutoCAD Creator(TM) -- build/run helpers. # # The Creator is authoritative SLeeLa source: the editable engine lives in # /lib/autocad (SLCadEntity, SLCadDocument, SLCadCommand, SLCadCreator) and the # SleelaUI GUI lives under cad/. This Makefile drives the self-contained, # runnable aggregate (creator.sleela), capturing the altered-and-saved DXF into # out/altered.dxf -- the "create -> alter -> save" story, headless. # # The SLeeLa runtime is located via SLEELA_BIN (defaults to the repository's # staged binary). Override on the command line if yours lives elsewhere. REPO_ROOT := $(abspath $(CURDIR)/../..) SLEELA_BIN ?= $(REPO_ROOT)/bin/SLeeLa OUT := out CREATOR := creator.sleela export SLEELA_SHEET ?= $(REPO_ROOT)/SHEET.sheet export SLEELA_SHA256_MANIFEST ?= $(REPO_ROOT)/security/sha256-manifest.json export SLEELA_LIB ?= $(REPO_ROOT)/lib .PHONY: all creator gui clean help all: creator # Run the SLeeLa Creator aggregate and capture the altered-document DXF. creator: $(OUT) @echo "Running AutoCAD Creator via SLeeLa: $(CREATOR)" @"$(SLEELA_BIN)" run "$(CREATOR)" > "$(OUT)/creator.log" 2>/dev/null \ || { echo "SLeeLa runtime not available; see cad/ for the Creator source."; exit 1; } @# The runtime prints a startup/verification banner on stdout before the @# program output; keep only the DXF document (from the first SECTION to EOF). @awk 'f{print} /^SECTION$$/{if(!f){print "0"; print; f=1}}' "$(OUT)/creator.log" \ | awk '1; /^EOF$$/{exit}' > "$(OUT)/altered.dxf" @echo "Wrote $(OUT)/altered.dxf (open in AutoCAD or LibreCAD)" @echo "Report (from $(OUT)/creator.log):" @sed -n 's/^/ /p' "$(OUT)/creator.log" | grep -E "create|alter|delet|undo|saved|entities|SELF-CHECK" || true @$(MAKE) --no-print-directory verify # Output-level checks on the saved DXF: the engine's own SELF-CHECK must pass, # and the DXF must carry the AutoCAD creation/update timestamps ($TDCREATE / # $TDUPDATE) and a well-formed EOF. Fails the build if any are missing. .PHONY: verify verify: @grep -q "SELF-CHECK: PASS" "$(OUT)/creator.log" || { echo "VERIFY FAIL: engine self-check did not pass"; exit 1; } @grep -q '\$$TDCREATE' "$(OUT)/altered.dxf" || { echo "VERIFY FAIL: DXF missing \$$TDCREATE timestamp"; exit 1; } @grep -q '\$$TDUPDATE' "$(OUT)/altered.dxf" || { echo "VERIFY FAIL: DXF missing \$$TDUPDATE timestamp"; exit 1; } @grep -q '^EOF$$' "$(OUT)/altered.dxf" || { echo "VERIFY FAIL: DXF not terminated with EOF"; exit 1; } @echo "VERIFY OK: self-check passed; DXF carries \$$TDCREATE + \$$TDUPDATE and ends with EOF" $(OUT): @mkdir -p "$(OUT)" # The SleelaUI GUI is pure SLeeLa and needs no external build; on a display, # run its application class through the runtime. gui: @echo "The SleelaUI GUI is SLeeLa source under cad/ (CadCreatorApp.sleela)." @echo "Run it through the SLeeLa runtime on a host with a display." clean: @rm -rf "$(OUT)" help: @echo "SLeeLa AutoCAD Creator(TM)" @echo " make creator Run the Creator aggregate -> out/altered.dxf" @echo " make gui Notes on running the SleelaUI GUI" @echo " make clean Remove generated output"