Package math
BigIntegerDemo #sleela 2.5 (lib/math/examples/BigIntegerDemo.sleela)
BigIntegerDemo class
Demonstrates native big-integer multiplication through the VM bridge. SLBigInteger.multiply() calls the bigmul() builtin (opcode OP_BIGMUL), which multiplies base-1e9 limb arrays with a C Karatsuba kernel in one native call. Shows exact products and a large-operand timing. Sibling .sleela files in the package are auto-linked by the runner.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
main | void main() | No description in source. |
BigMulVerify #sleela 2.5 (lib/math/examples/BigMulVerify.sleela)
BigMulVerify class
Regression check for the native big-integer multiply (OP_BIGMUL). It multiplies the same operands two ways -- the native bigmul() bridge and a pure-SLeeLa schoolbook multiply -- across several operand sizes spanning the Karatsuba threshold, and asserts the limb arrays are identical. This guards the Karatsuba recombination (the z1 = z1 - z0 - z2 borrow, which must carry a borrow of up to two per limb) against silent regressions.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
schoolbook | int schoolbook(int[] a, int na, int[] b, int nb, int[] r) | Pure-SLeeLa reference multiply over base-1e9 limbs. |
nextLimb | int nextLimb(int seed) | A tiny deterministic limb generator (linear congruential), values in [0,1e9). |
checkSize | int checkSize(int n, int seed) | Multiply n-limb operands both ways; return the count of mismatched limbs. |
main | void main() | No description in source. |
MathDemo #sleela 2.5 (lib/math/examples/MathDemo.sleela)
MathDemo class
A runnable tour of the lib/math package exercising a cross-section of the real implementations: number theory, statistics, linear algebra, calculus, geometry, a distribution, and a linear solve. Sibling .sleela files in the package are auto-linked by the runner.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
main | void main() | No description in source. |
PiReferenceDemo #sleela 2.5 (lib/math/examples/PiReferenceDemo.sleela)
PiReferenceDemo class
Reports the SLeeLa Modium static pi reference and the math precision norms, and self-verifies pi. SLeeLa prints the verification result on compile (check) and run, so a reader sees that the pi value is correct.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
main | void main() | No description in source. |
SLAbsoluteValue #sleela 2.5 (lib/math/SLAbsoluteValue.sleela)
SLAbsoluteValue class
Defines the SLeeLa standard-library type SLAbsoluteValue used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
ofDouble | double ofDouble(double x) | No description in source. |
ofInt | int ofInt(int x) | No description in source. |
ofLong | long ofLong(long x) | No description in source. |
SLAccumulation #sleela 2.5 (lib/math/SLAccumulation.sleela)
SLAccumulation class
Defines the SLeeLa standard-library type SLAccumulation used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
total | double total | No description in source. |
count | int count | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
reset | void reset() | No description in source. |
add | void add(double v) | No description in source. |
sum | double sum() | No description in source. |
mean | double mean() | No description in source. |
getCount | int getCount() | No description in source. |
SLAdjacencyMatrix #sleela 2.5 (lib/math/SLAdjacencyMatrix.sleela)
SLAdjacencyMatrix class
Defines the SLeeLa standard-library type SLAdjacencyMatrix used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
n | int n | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int size) | No description in source. |
addEdge | void addEdge(double[] m, int u, int v) | No description in source. |
adjacent | boolean adjacent(double[] m, int u, int v) | No description in source. |
degree | int degree(double[] m, int u) | No description in source. |
SLAlgebra #sleela 2.5 (lib/math/SLAlgebra.sleela)
SLAlgebra class
Defines the SLeeLa standard-library type SLAlgebra used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
solveQuadratic | int solveQuadratic(double a, double b, double c, double[] out) | No description in source. |
evaluateLinear | double evaluateLinear(double m, double b, double x) | No description in source. |
SLAngle #sleela 2.5 (lib/math/SLAngle.sleela)
SLAngle class
Defines the SLeeLa standard-library type SLAngle used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
radians | double radians | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
pi | double pi() | No description in source. |
setRadians | void setRadians(double r) | No description in source. |
setDegrees | void setDegrees(double d) | No description in source. |
getRadians | double getRadians() | No description in source. |
getDegrees | double getDegrees() | No description in source. |
normalized | double normalized() | Normalize to the half-open interval from 0 up to two pi. |
SLANOVA #sleela 2.5 (lib/math/SLANOVA.sleela)
SLANOVA class
Defines the SLeeLa standard-library type SLANOVA used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
mean | double mean(double[] xs, int n) | No description in source. |
fStatistic | double fStatistic(double[] groupMeans, int[] groupSizes, int g, | No description in source. |
SLApproximation #sleela 2.5 (lib/math/SLApproximation.sleela)
SLApproximation class
Defines the SLeeLa standard-library type SLApproximation used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
absd | double absd(double x) | No description in source. |
relativeError | double relativeError(double approx, double exact) | Relative error |approx - exact| / |exact|. |
absoluteError | double absoluteError(double approx, double exact) | No description in source. |
SLArithmetic #sleela 2.5 (lib/math/SLArithmetic.sleela)
SLArithmetic class
Defines the SLeeLa standard-library type SLArithmetic used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
add | double add(double a, double b) | No description in source. |
subtract | double subtract(double a, double b) | No description in source. |
multiply | double multiply(double a, double b) | No description in source. |
divide | double divide(double a, double b) | No description in source. |
negate | double negate(double a) | No description in source. |
SLAverage #sleela 2.5 (lib/math/SLAverage.sleela)
SLAverage class
Defines the SLeeLa standard-library type SLAverage used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double[] xs, int n) | No description in source. |
weighted | double weighted(double[] xs, double[] ws, int n) | Weighted average: sum(w*x) / sum(w). |
SLBayes #sleela 2.5 (lib/math/SLBayes.sleela)
SLBayes class
Defines the SLeeLa standard-library type SLBayes used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
posterior | double posterior(double pBgivenA, double pA, double pBgivenNotA) | No description in source. |
SLBezier #sleela 2.5 (lib/math/SLBezier.sleela)
SLBezier class
Defines the SLeeLa standard-library type SLBezier used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
cubic | double cubic(double p0, double p1, double p2, double p3, double t) | No description in source. |
quadratic | double quadratic(double p0, double p1, double p2, double t) | No description in source. |
SLBigDecimal #sleela 2.5 (lib/math/SLBigDecimal.sleela)
SLBigDecimal class
Defines the SLeeLa standard-library type SLBigDecimal used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
unscaled | long unscaled | No description in source. |
scale | int scale | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(long value, int decimalPlaces) | No description in source. |
toDouble | double toDouble() | No description in source. |
getUnscaled | long getUnscaled() | No description in source. |
getScale | int getScale() | No description in source. |
SLBigInteger #sleela 2.5 (lib/math/SLBigInteger.sleela)
SLBigInteger class
Defines the SLeeLa standard-library type SLBigInteger used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
limbs | int[] limbs | No description in source. |
count | int count | No description in source. |
sign | int sign | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
fromLong | void fromLong(long v) | No description in source. |
limbCount | int limbCount() | No description in source. |
getSign | int getSign() | No description in source. |
fromLimbs | void fromLimbs(int[] ls, int n, int sgn) | Build directly from a caller-held limb array (little-endian, base 1e9). |
limbAt | int limbAt(int i) | No description in source. |
multiply | SLBigInteger multiply(SLBigInteger other) | No description in source. |
normalize | void normalize() | Trim trailing zero limbs (keep at least one). |
digitCountOf | int digitCountOf(int v) | The number of decimal digits in a nonnegative int (1 for zero). |
padLimb | String padLimb(int v) | Nine-character zero-padded decimal of a limb value 0..999999999. |
toDecimalString | String toDecimalString() | No description in source. |
SLBinomialCoefficient #sleela 2.5 (lib/math/SLBinomialCoefficient.sleela)
SLBinomialCoefficient class
Defines the SLeeLa standard-library type SLBinomialCoefficient used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
compute | long compute(int n, int k) | C(n, k) by the multiplicative formula, computed to avoid overflow early. |
SLBinomialDistribution #sleela 2.5 (lib/math/SLBinomialDistribution.sleela)
SLBinomialDistribution class
Defines the SLeeLa standard-library type SLBinomialDistribution used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
pmf | double pmf(int n, int k, double p) | Probability mass C(n,k) p^k (1-p)^(n-k). |
mean | double mean(int n, double p) | No description in source. |
variance | double variance(int n, double p) | No description in source. |
SLBisectionSolver #sleela 2.5 (lib/math/SLBisectionSolver.sleela)
SLBisectionSolver class
Defines the SLeeLa standard-library type SLBisectionSolver used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
absd | double absd(double x) | No description in source. |
midpoint | double midpoint(double a, double b) | No description in source. |
half | int half(double fa, double fmid) | No description in source. |
bracketed | boolean bracketed(double fa, double fb) | No description in source. |
SLCardinality #sleela 2.5 (lib/math/SLCardinality.sleela)
SLCardinality class
Defines the SLeeLa standard-library type SLCardinality used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | int of(int[] a, int n) | No description in source. |
ofUnion | int ofUnion(int[] a, int na, int[] b, int nb) | Cardinality of the union of two distinct-valued sets. |
sameCardinality | boolean sameCardinality(int na, int nb) | No description in source. |
SLCartesianCoordinate #sleela 2.5 (lib/math/SLCartesianCoordinate.sleela)
SLCartesianCoordinate class
Defines the SLeeLa standard-library type SLCartesianCoordinate used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
x | double x | No description in source. |
y | double y | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
set | void set(double px, double py) | No description in source. |
radius | double radius() | No description in source. |
getX | double getX() | No description in source. |
getY | double getY() | No description in source. |
SLChiSquareTest #sleela 2.5 (lib/math/SLChiSquareTest.sleela)
SLChiSquareTest class
Defines the SLeeLa standard-library type SLChiSquareTest used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
statistic | double statistic(double[] observed, double[] expected, int n) | No description in source. |
degreesOfFreedom | int degreesOfFreedom(int categories) | No description in source. |
SLClamp #sleela 2.5 (lib/math/SLClamp.sleela)
SLClamp class
Defines the SLeeLa standard-library type SLClamp used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double x, double lo, double hi) | Constrain x to the closed interval [lo, hi]. |
ofInt | int ofInt(int x, int lo, int hi) | No description in source. |
inRange | boolean inRange(double x, double lo, double hi) | No description in source. |
SLCoefficient #sleela 2.5 (lib/math/SLCoefficient.sleela)
SLCoefficient class
Defines the SLeeLa standard-library type SLCoefficient used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
value | double value | No description in source. |
degree | int degree | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(double v, int d) | No description in source. |
getValue | double getValue() | No description in source. |
getDegree | int getDegree() | No description in source. |
termAt | double termAt(double x) | No description in source. |
SLCombination #sleela 2.5 (lib/math/SLCombination.sleela)
SLCombination class
Defines the SLeeLa standard-library type SLCombination used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
count | long count(int n, int k) | C(n,k), the number of k-subsets of an n-set. |
SLCombinationGenerator #sleela 2.5 (lib/math/SLCombinationGenerator.sleela)
SLCombinationGenerator class
Defines the SLeeLa standard-library type SLCombinationGenerator used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
generate | int generate(int n, int k, int[] out) | No description in source. |
SLCombinatorics #sleela 2.5 (lib/math/SLCombinatorics.sleela)
SLCombinatorics class
Defines the SLeeLa standard-library type SLCombinatorics used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
factorial | long factorial(int n) | n! as a long. |
permutations | long permutations(int n, int k) | Permutations P(n,k) = n!/(n-k)! by the falling product. |
combinations | long combinations(int n, int k) | Combinations C(n,k) by the multiplicative formula. |
SLComparator #sleela 2.5 (lib/math/SLComparator.sleela)
SLComparator class
Defines the SLeeLa standard-library type SLComparator used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
compareDouble | int compareDouble(double a, double b) | No description in source. |
compareInt | int compareInt(int a, int b) | No description in source. |
equalWithin | boolean equalWithin(double a, double b, double tol) | No description in source. |
SLComplex #sleela 2.5 (lib/math/SLComplex.sleela)
SLComplex class
Defines the SLeeLa standard-library type SLComplex used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
re | double re | No description in source. |
im | double im | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
set | void set(double r, double i) | No description in source. |
add | void add(SLComplex o, SLComplex out) | No description in source. |
multiply | void multiply(SLComplex o, SLComplex out) | No description in source. |
modulus | double modulus() | No description in source. |
conjugate | void conjugate(SLComplex out) | No description in source. |
getRe | double getRe() | No description in source. |
getIm | double getIm() | No description in source. |
SLConditionNumber #sleela 2.5 (lib/math/SLConditionNumber.sleela)
SLConditionNumber class
Defines the SLeeLa standard-library type SLConditionNumber used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
fromExtremes | double fromExtremes(double largest, double smallest) | No description in source. |
illConditioned | boolean illConditioned(double cond, double threshold) | No description in source. |
SLConfidenceInterval #sleela 2.5 (lib/math/SLConfidenceInterval.sleela)
SLConfidenceInterval class
Defines the SLeeLa standard-library type SLConfidenceInterval used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
ofMean | void ofMean(double mean, double stdDev, int n, double z, double[] out) | No description in source. |
marginOfError | double marginOfError(double stdDev, int n, double z) | No description in source. |
SLConfidenceLevel #sleela 2.5 (lib/math/SLConfidenceLevel.sleela)
SLConfidenceLevel class
Defines the SLeeLa standard-library type SLConfidenceLevel used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
criticalZ | double criticalZ(int percent) | No description in source. |
alpha | double alpha(int percent) | No description in source. |
SLConstant #sleela 2.5 (lib/math/SLConstant.sleela)
SLConstant class
Defines the SLeeLa standard-library type SLConstant used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
pi | double pi() | Named mathematical constants. |
e | double e() | No description in source. |
goldenRatio | double goldenRatio() | No description in source. |
sqrt2 | double sqrt2() | No description in source. |
eulerGamma | double eulerGamma() | No description in source. |
SLConstraint #sleela 2.5 (lib/math/SLConstraint.sleela)
SLConstraint class
Defines the SLeeLa standard-library type SLConstraint used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
op | int op | No description in source. |
rhs | double rhs | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int o, double r) | No description in source. |
lhs | double lhs(double[] coeffs, double[] x, int n) | No description in source. |
satisfied | boolean satisfied(double[] coeffs, double[] x, int n, double tol) | No description in source. |
SLConvergence #sleela 2.5 (lib/math/SLConvergence.sleela)
SLConvergence class
Defines the SLeeLa standard-library type SLConvergence used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
absd | double absd(double x) | No description in source. |
reached | boolean reached(double current, double previous, double tol) | Has a sequence converged: successive terms within tol? |
rate | double rate(double e0, double e1, double e2) | Linear convergence rate estimate from three successive errors. |
SLCoordinate #sleela 2.5 (lib/math/SLCoordinate.sleela)
SLCoordinate class
Defines the SLeeLa standard-library type SLCoordinate used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
components | double[] components | No description in source. |
dim | int dim | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int d) | No description in source. |
setComponent | void setComponent(int i, double v) | No description in source. |
getComponent | double getComponent(int i) | No description in source. |
getDim | int getDim() | No description in source. |
SLCoordinateDescent #sleela 2.5 (lib/math/SLCoordinateDescent.sleela)
SLCoordinateDescent class
Defines the SLeeLa standard-library type SLCoordinateDescent used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
coordinateStep | double coordinateStep(double x, double g, double h) | No description in source. |
nextCoordinate | int nextCoordinate(int current, int n) | No description in source. |
SLCorrelation #sleela 2.5 (lib/math/SLCorrelation.sleela)
SLCorrelation class
Defines the SLeeLa standard-library type SLCorrelation used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
mean | double mean(double[] xs, int n) | No description in source. |
pearson | double pearson(double[] xs, double[] ys, int n) | Pearson product-moment correlation coefficient in [-1, 1]. |
SLCorrelationMatrix #sleela 2.5 (lib/math/SLCorrelationMatrix.sleela)
SLCorrelationMatrix class
Defines the SLeeLa standard-library type SLCorrelationMatrix used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
corr | double corr(double[] data, int n, int vi, int vj) | No description in source. |
build | void build(double[] data, int m, int n, double[] out) | No description in source. |
SLCosine #sleela 2.5 (lib/math/SLCosine.sleela)
SLCosine class
Defines the SLeeLa standard-library type SLCosine used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
pi | double pi() | No description in source. |
reduce | double reduce(double x) | No description in source. |
sin | double sin(double x) | No description in source. |
cos | double cos(double x) | No description in source. |
of | double of(double x) | No description in source. |
SLCovariance #sleela 2.5 (lib/math/SLCovariance.sleela)
SLCovariance class
Defines the SLeeLa standard-library type SLCovariance used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
mean | double mean(double[] xs, int n) | No description in source. |
population | double population(double[] xs, double[] ys, int n) | Population covariance of paired samples (divides by n). |
sample | double sample(double[] xs, double[] ys, int n) | Sample covariance (divides by n-1). |
SLCovarianceMatrix #sleela 2.5 (lib/math/SLCovarianceMatrix.sleela)
SLCovarianceMatrix class
Defines the SLeeLa standard-library type SLCovarianceMatrix used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
cov | double cov(double[] data, int n, int vi, int vj) | No description in source. |
build | void build(double[] data, int m, int n, double[] out) | No description in source. |
SLCrossProduct #sleela 2.5 (lib/math/SLCrossProduct.sleela)
SLCrossProduct class
Defines the SLeeLa standard-library type SLCrossProduct used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | void of(double[] a, double[] b, double[] out) | 3D cross product a x b, written into `out` (length 3). |
of2D | double of2D(double ax, double ay, double bx, double by) | The scalar magnitude of the 2D cross product. |
SLCubicSpline #sleela 2.5 (lib/math/SLCubicSpline.sleela)
SLCubicSpline class
Defines the SLeeLa standard-library type SLCubicSpline used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
hermite | double hermite(double p0, double p1, double m0, double m1, double t) | No description in source. |
SLDataSummary #sleela 2.5 (lib/math/SLDataSummary.sleela)
SLDataSummary class
Defines the SLeeLa standard-library type SLDataSummary used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
summarize | void summarize(double[] xs, int n, double[] out) | No description in source. |
SLDerivative #sleela 2.5 (lib/math/SLDerivative.sleela)
SLDerivative class
Defines the SLeeLa standard-library type SLDerivative used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
central | double central(double[] xs, double[] ys, int i, int n) | No description in source. |
forward | double forward(double[] xs, double[] ys, int i) | Forward difference at the left endpoint. |
SLDeterminant #sleela 2.5 (lib/math/SLDeterminant.sleela)
SLDeterminant class
Defines the SLeeLa standard-library type SLDeterminant used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double[] src, int n) | Determinant of an n x n row-major matrix via Gaussian elimination on a copy. |
SLDifference #sleela 2.5 (lib/math/SLDifference.sleela)
SLDifference class
Defines the SLeeLa standard-library type SLDifference used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double a, double b) | No description in source. |
absolute | double absolute(double a, double b) | No description in source. |
forward | void forward(double[] xs, int n, double[] out) | Successive differences of a sequence written into out (length n-1). |
SLDimension #sleela 2.5 (lib/math/SLDimension.sleela)
SLDimension class
Defines the SLeeLa standard-library type SLDimension used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
value | int value | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(int d) | No description in source. |
get | int get() | No description in source. |
isScalar | boolean isScalar() | No description in source. |
isVector | boolean isVector() | No description in source. |
compatibleWith | boolean compatibleWith(SLDimension o) | No description in source. |
SLDiscreteFourier #sleela 2.5 (lib/math/SLDiscreteFourier.sleela)
SLDiscreteFourier class
Defines the SLeeLa standard-library type SLDiscreteFourier used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
reduceAngle | double reduceAngle(double x) | No description in source. |
sinv | double sinv(double x) | No description in source. |
cosv | double cosv(double x) | No description in source. |
forward | void forward(double[] signal, int n, double[] reOut, double[] imOut) | No description in source. |
SLDistance #sleela 2.5 (lib/math/SLDistance.sleela)
SLDistance class
Defines the SLeeLa standard-library type SLDistance used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
euclidean2D | double euclidean2D(double x1, double y1, double x2, double y2) | No description in source. |
euclidean3D | double euclidean3D(double x1, double y1, double z1, double x2, double y2, double z2) | No description in source. |
manhattan2D | double manhattan2D(double x1, double y1, double x2, double y2) | No description in source. |
SLDistribution #sleela 2.5 (lib/math/SLDistribution.sleela)
SLDistribution class
Defines the SLeeLa standard-library type SLDistribution used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
mean | double mean(double[] values, double[] probs, int n) | A generic discrete distribution over sampled outcome probabilities. |
variance | double variance(double[] values, double[] probs, int n) | No description in source. |
normalized | boolean normalized(double[] probs, int n, double tol) | No description in source. |
SLDivisor #sleela 2.5 (lib/math/SLDivisor.sleela)
SLDivisor class
Defines the SLeeLa standard-library type SLDivisor used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
divisorCount | int divisorCount(int n) | The number of positive divisors of n. |
divisorSum | int divisorSum(int n) | The sum of the positive divisors of n. |
divides | boolean divides(int d, int n) | No description in source. |
SLDotProduct #sleela 2.5 (lib/math/SLDotProduct.sleela)
SLDotProduct class
Defines the SLeeLa standard-library type SLDotProduct used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double[] a, double[] b, int n) | No description in source. |
SLDoubleMath #sleela 2.5 (lib/math/SLDoubleMath.sleela)
SLDoubleMath class
Defines the SLeeLa standard-library type SLDoubleMath used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
absD | double absD(double x) | No description in source. |
hypot | double hypot(double a, double b) | No description in source. |
copySign | double copySign(double mag, double sgn) | No description in source. |
SLEigenvalue #sleela 2.5 (lib/math/SLEigenvalue.sleela)
SLEigenvalue class
Defines the SLeeLa standard-library type SLEigenvalue used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
of2x2 | int of2x2(double a, double b, double c, double d, double[] out) | No description in source. |
powerIteration | double powerIteration(double[] m, int n, double[] vec, int iters) | No description in source. |
SLEigenvector #sleela 2.5 (lib/math/SLEigenvector.sleela)
SLEigenvector class
Defines the SLeeLa standard-library type SLEigenvector used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
dominant | void dominant(double[] m, int n, double[] vec, int iters) | No description in source. |
SLEquation #sleela 2.5 (lib/math/SLEquation.sleela)
SLEquation class
Defines the SLeeLa standard-library type SLEquation used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
a | double a | A linear equation a x + b = 0 with a single root. |
b | double b | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(double pa, double pb) | No description in source. |
hasUniqueRoot | boolean hasUniqueRoot() | No description in source. |
root | double root() | No description in source. |
leftMinusRight | double leftMinusRight(double x) | No description in source. |
SLErrorBound #sleela 2.5 (lib/math/SLErrorBound.sleela)
SLErrorBound class
Defines the SLeeLa standard-library type SLErrorBound used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
bound | double bound | Record and widen an error bound as a computation proceeds. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
absd | double absd(double x) | No description in source. |
reset | void reset() | No description in source. |
observe | void observe(double err) | No description in source. |
getBound | double getBound() | No description in source. |
acceptable | boolean acceptable(double tol) | No description in source. |
SLExpectation #sleela 2.5 (lib/math/SLExpectation.sleela)
SLExpectation class
Defines the SLeeLa standard-library type SLExpectation used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double[] values, double[] probs, int n) | Expected value E[X] = sum(x_i * p_i); probabilities should sum to 1. |
SLExponential #sleela 2.5 (lib/math/SLExponential.sleela)
SLExponential class
Defines the SLeeLa standard-library type SLExponential used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
exp | double exp(double x) | e^x via a Taylor series; adequate for |x| within a modest range. |
e | double e() | No description in source. |
SLExpression #sleela 2.5 (lib/math/SLExpression.sleela)
SLExpression class
Defines the SLeeLa standard-library type SLExpression used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
evaluatePostfix | double evaluatePostfix(int[] ops, double[] vals, int n) | No description in source. |
SLExpressionEvaluator #sleela 2.5 (lib/math/SLExpressionEvaluator.sleela)
SLExpressionEvaluator class
Defines the SLeeLa standard-library type SLExpressionEvaluator used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
evaluate | double evaluate(int[] ops, double[] vals, int n) | Evaluate a postfix token stream (op -1 = push vals[i], 0..3 = + - * /). |
SLExpressionTree #sleela 2.5 (lib/math/SLExpressionTree.sleela)
SLExpressionTree class
Defines the SLeeLa standard-library type SLExpressionTree used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
evaluate | double evaluate(int[] kind, double[] val, int[] left, int[] right, int node) | No description in source. |
SLFactor #sleela 2.5 (lib/math/SLFactor.sleela)
SLFactor class
Defines the SLeeLa standard-library type SLFactor used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
root | double root | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(double r) | No description in source. |
evaluate | double evaluate(double x) | No description in source. |
getRoot | double getRoot() | No description in source. |
SLFactorial #sleela 2.5 (lib/math/SLFactorial.sleela)
SLFactorial class
Defines the SLeeLa standard-library type SLFactorial used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
compute | long compute(int n) | Factorial n! for nonnegative n, as a 64-bit long (exact through 20!). |
falling | long falling(int n, int k) | Falling factorial n*(n-1)*...*(n-k+1). |
SLFastFourier #sleela 2.5 (lib/math/SLFastFourier.sleela)
SLFastFourier class
Defines the SLeeLa standard-library type SLFastFourier used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
reduceAngle | double reduceAngle(double x) | No description in source. |
sinv | double sinv(double x) | No description in source. |
cosv | double cosv(double x) | No description in source. |
isPowerOfTwo | boolean isPowerOfTwo(int n) | No description in source. |
transform | void transform(double[] re, double[] im, int n) | No description in source. |
SLFibonacci #sleela 2.5 (lib/math/SLFibonacci.sleela)
SLFibonacci class
Defines the SLeeLa standard-library type SLFibonacci used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
compute | long compute(int n) | The n-th Fibonacci number (F0 = 0, F1 = 1), computed iteratively. |
isFibonacci | boolean isFibonacci(long v) | No description in source. |
SLFiniteSet #sleela 2.5 (lib/math/SLFiniteSet.sleela)
SLFiniteSet class
Defines the SLeeLa standard-library type SLFiniteSet used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
members | int[] members | No description in source. |
size | int size | No description in source. |
capacity | int capacity | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int cap) | No description in source. |
contains | boolean contains(int v) | No description in source. |
add | boolean add(int v) | No description in source. |
cardinality | int cardinality() | No description in source. |
SLFixedPoint #sleela 2.5 (lib/math/SLFixedPoint.sleela)
SLFixedPoint class
Defines the SLeeLa standard-library type SLFixedPoint used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
fracBits | int fracBits | No description in source. |
raw | long raw | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int bits) | No description in source. |
fromDouble | void fromDouble(double x) | No description in source. |
toDouble | double toDouble() | No description in source. |
getRaw | long getRaw() | No description in source. |
SLFloatMath #sleela 2.5 (lib/math/SLFloatMath.sleela)
SLFloatMath class
Defines the SLeeLa standard-library type SLFloatMath used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
absF | double absF(double x) | No description in source. |
epsilon | double epsilon() | Smallest resolvable gap near 1.0 for single precision. |
roundTo | double roundTo(double x, int places) | No description in source. |
SLFormula #sleela 2.5 (lib/math/SLFormula.sleela)
SLFormula class
Defines the SLeeLa standard-library type SLFormula used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
label | String label | A named formula stored as a postfix token stream plus a human label. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
name | void name(String l) | No description in source. |
formulaName | String formulaName() | No description in source. |
evaluate | double evaluate(int[] ops, double[] vals, int n) | No description in source. |
SLFormulaParser #sleela 2.5 (lib/math/SLFormulaParser.sleela)
SLFormulaParser class
Defines the SLeeLa standard-library type SLFormulaParser used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
tokenCount | int tokenCount | No description in source. |
operandCount | int operandCount | No description in source. |
operatorCount | int operatorCount | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
parse | void parse(String text, int length, int[] codes) | No description in source. |
charCodeAt | int charCodeAt(String s, int i) | No description in source. |
getTokenCount | int getTokenCount() | No description in source. |
SLFormulaSimplifier #sleela 2.5 (lib/math/SLFormulaSimplifier.sleela)
SLFormulaSimplifier class
Defines the SLeeLa standard-library type SLFormulaSimplifier used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
simplifyLinear | void simplifyLinear(double a, double b, double[] out) | No description in source. |
isIdentityMultiplier | boolean isIdentityMultiplier(double a) | No description in source. |
isAnnihilator | boolean isAnnihilator(double a) | No description in source. |
SLFourier #sleela 2.5 (lib/math/SLFourier.sleela)
SLFourier class
Defines the SLeeLa standard-library type SLFourier used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
reduceAngle | double reduceAngle(double x) | No description in source. |
sinv | double sinv(double x) | No description in source. |
cosv | double cosv(double x) | No description in source. |
magnitude | void magnitude(double[] signal, int n, double[] magOut) | Magnitude spectrum of a real signal via the DFT: mag[k] = |X[k]|. |
SLFourierSeries #sleela 2.5 (lib/math/SLFourierSeries.sleela)
SLFourierSeries class
Defines the SLeeLa standard-library type SLFourierSeries used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
reduceAngle | double reduceAngle(double x) | No description in source. |
sinv | double sinv(double x) | No description in source. |
cosv | double cosv(double x) | No description in source. |
evaluate | double evaluate(double a0, double[] a, double[] b, int terms, double x) | No description in source. |
SLFunction #sleela 2.5 (lib/math/SLFunction.sleela)
SLFunction class
Defines the SLeeLa standard-library type SLFunction used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
evaluate | double evaluate(double[] xs, double[] ys, int n, double x) | No description in source. |
SLGcd #sleela 2.5 (lib/math/SLGcd.sleela)
SLGcd class
Defines the SLeeLa standard-library type SLGcd used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
compute | int compute(int a, int b) | Greatest common divisor by the Euclidean algorithm. |
coprime | boolean coprime(int a, int b) | No description in source. |
SLGeometry #sleela 2.5 (lib/math/SLGeometry.sleela)
SLGeometry class
Defines the SLeeLa standard-library type SLGeometry used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
triangleArea | double triangleArea(double x1, double y1, double x2, double y2, double x3, double y3) | No description in source. |
circleArea | double circleArea(double r) | No description in source. |
circleCircumference | double circleCircumference(double r) | No description in source. |
polygonPerimeter | double polygonPerimeter(double[] xs, double[] ys, int n) | No description in source. |
polygonArea | double polygonArea(double[] xs, double[] ys, int n) | Signed polygon area via the shoelace formula (absolute value returned). |
SLGradient #sleela 2.5 (lib/math/SLGradient.sleela)
SLGradient class
Defines the SLeeLa standard-library type SLGradient used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
compute | void compute(double[] fPlus, double[] fMinus, int dims, double h, double[] out) | No description in source. |
SLGradientDescent #sleela 2.5 (lib/math/SLGradientDescent.sleela)
SLGradientDescent class
Defines the SLeeLa standard-library type SLGradientDescent used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
step | void step(double[] x, double[] grad, double rate, int n) | One gradient-descent parameter update x := x - rate * grad, elementwise. |
scalarStep | double scalarStep(double x, double grad, double rate) | No description in source. |
SLGradientField #sleela 2.5 (lib/math/SLGradientField.sleela)
SLGradientField class
Defines the SLeeLa standard-library type SLGradientField used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
w | int w | No description in source. |
h | int h | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int width, int height) | No description in source. |
gradientAt | void gradientAt(double[] f, int x, int y, double spacing, double[] out) | No description in source. |
SLGraph #sleela 2.5 (lib/math/SLGraph.sleela)
SLGraph class
Defines the SLeeLa standard-library type SLGraph used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
n | int n | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int size) | No description in source. |
reachableCount | int reachableCount(double[] adj, int source) | No description in source. |
connected | boolean connected(double[] adj) | No description in source. |
SLGraphEdge #sleela 2.5 (lib/math/SLGraphEdge.sleela)
SLGraphEdge class
Defines the SLeeLa standard-library type SLGraphEdge used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
from | int from | No description in source. |
to | int to | No description in source. |
weight | double weight | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(int u, int v, double w) | No description in source. |
getFrom | int getFrom() | No description in source. |
getTo | int getTo() | No description in source. |
getWeight | double getWeight() | No description in source. |
connects | boolean connects(int a, int b) | No description in source. |
SLGraphNode #sleela 2.5 (lib/math/SLGraphNode.sleela)
SLGraphNode class
Defines the SLeeLa standard-library type SLGraphNode used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
id | int id | No description in source. |
degree | int degree | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int nodeId) | No description in source. |
incrementDegree | void incrementDegree() | No description in source. |
getId | int getId() | No description in source. |
getDegree | int getDegree() | No description in source. |
SLHessian #sleela 2.5 (lib/math/SLHessian.sleela)
SLHessian class
Defines the SLeeLa standard-library type SLHessian used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
build | void build(double fxx, double fyy, double fxy, double[] out) | No description in source. |
determinant | double determinant(double fxx, double fyy, double fxy) | No description in source. |
classify | int classify(double fxx, double fyy, double fxy) | No description in source. |
SLHistogram #sleela 2.5 (lib/math/SLHistogram.sleela)
SLHistogram class
Defines the SLeeLa standard-library type SLHistogram used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
build | void build(double[] xs, int n, double lo, double hi, int bins, int[] out) | No description in source. |
SLHypothesisTest #sleela 2.5 (lib/math/SLHypothesisTest.sleela)
SLHypothesisTest class
Defines the SLeeLa standard-library type SLHypothesisTest used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
zStatistic | double zStatistic(double sampleMean, double mu0, double sigma, int n) | No description in source. |
rejectTwoSided | boolean rejectTwoSided(double z, double critical) | No description in source. |
SLInequality #sleela 2.5 (lib/math/SLInequality.sleela)
SLInequality class
Defines the SLeeLa standard-library type SLInequality used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
a | double a | No description in source. |
b | double b | No description in source. |
op | int op | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(double pa, double pb, int o) | No description in source. |
satisfies | boolean satisfies(double x) | No description in source. |
SLInfiniteSet #sleela 2.5 (lib/math/SLInfiniteSet.sleela)
SLInfiniteSet class
Defines the SLeeLa standard-library type SLInfiniteSet used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
kind | int kind | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int k) | No description in source. |
contains | boolean contains(int v) | No description in source. |
countable | boolean countable() | No description in source. |
SLIntegerMath #sleela 2.5 (lib/math/SLIntegerMath.sleela)
SLIntegerMath class
Defines the SLeeLa standard-library type SLIntegerMath used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
add | long add(long a, long b) | No description in source. |
multiply | long multiply(long a, long b) | No description in source. |
gcd | long gcd(long a, long b) | No description in source. |
pow | long pow(long base, int exp) | No description in source. |
isEven | boolean isEven(long v) | No description in source. |
SLIntegral #sleela 2.5 (lib/math/SLIntegral.sleela)
SLIntegral class
Defines the SLeeLa standard-library type SLIntegral used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
trapezoid | double trapezoid(double[] xs, double[] ys, int n) | Definite integral of a sampled function by the trapezoidal rule. |
SLInterpolation #sleela 2.5 (lib/math/SLInterpolation.sleela)
SLInterpolation class
Defines the SLeeLa standard-library type SLInterpolation used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
linear | double linear(double x0, double y0, double x1, double y1, double x) | Linear interpolation between (x0,y0) and (x1,y1) at x. |
lerp | double lerp(double a, double b, double t) | Normalized linear blend: (1-t)*a + t*b. |
SLInterpolationTable #sleela 2.5 (lib/math/SLInterpolationTable.sleela)
SLInterpolationTable class
Defines the SLeeLa standard-library type SLInterpolationTable used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
rows | int rows | A sorted table lookup with linear interpolation between bracketing rows. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
setRows | void setRows(int r) | No description in source. |
getRows | int getRows() | No description in source. |
lookup | double lookup(double[] xs, double[] ys, int n, double x) | No description in source. |
SLIntersection #sleela 2.5 (lib/math/SLIntersection.sleela)
SLIntersection class
Defines the SLeeLa standard-library type SLIntersection used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
contains | boolean contains(int[] a, int na, int v) | No description in source. |
of | int of(int[] a, int na, int[] b, int nb, int[] out) | No description in source. |
SLInterval #sleela 2.5 (lib/math/SLInterval.sleela)
SLInterval class
Defines the SLeeLa standard-library type SLInterval used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
lo | double lo | No description in source. |
hi | double hi | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(double a, double b) | No description in source. |
contains | boolean contains(double x) | No description in source. |
width | double width() | No description in source. |
midpoint | double midpoint() | No description in source. |
overlaps | boolean overlaps(SLInterval o) | No description in source. |
SLIntervalArithmetic #sleela 2.5 (lib/math/SLIntervalArithmetic.sleela)
SLIntervalArithmetic class
Defines the SLeeLa standard-library type SLIntervalArithmetic used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
add | void add(double aLo, double aHi, double bLo, double bHi, double[] out) | No description in source. |
multiply | void multiply(double aLo, double aHi, double bLo, double bHi, double[] out) | No description in source. |
SLInverse #sleela 2.5 (lib/math/SLInverse.sleela)
SLInverse class
Defines the SLeeLa standard-library type SLInverse used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | boolean of(double[] src, double[] inv, int n) | No description in source. |
SLIteration #sleela 2.5 (lib/math/SLIteration.sleela)
SLIteration class
Defines the SLeeLa standard-library type SLIteration used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
count | int count | No description in source. |
limit | int limit | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int maxIterations) | No description in source. |
next | boolean next() | No description in source. |
getCount | int getCount() | No description in source. |
resetCount | void resetCount() | No description in source. |
SLJacobian #sleela 2.5 (lib/math/SLJacobian.sleela)
SLJacobian class
Defines the SLeeLa standard-library type SLJacobian used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
build | void build(double[] fPlus, double[] fMinus, int m, int n, double h, double[] out) | No description in source. |
SLKurtosis #sleela 2.5 (lib/math/SLKurtosis.sleela)
SLKurtosis class
Defines the SLeeLa standard-library type SLKurtosis used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
mean | double mean(double[] xs, int n) | No description in source. |
of | double of(double[] xs, int n) | Excess kurtosis: m4 / m2^2 - 3. |
SLLagrangeInterpolation #sleela 2.5 (lib/math/SLLagrangeInterpolation.sleela)
SLLagrangeInterpolation class
Defines the SLeeLa standard-library type SLLagrangeInterpolation used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
evaluate | double evaluate(double[] xs, double[] ys, int n, double x) | Lagrange interpolating polynomial evaluated at x, through n sample points. |
SLLambda #sleela 2.5 (lib/math/SLLambda.sleela)
SLLambda class
Defines the SLeeLa standard-library type SLLambda used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
scale | double scale | An affine lambda x -> scale*x + offset; compose combines two lambdas. |
offset | double offset | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(double s, double o) | No description in source. |
apply | double apply(double x) | No description in source. |
composeAfter | void composeAfter(SLLambda g, SLLambda out) | Compose this after g (this(g(x))), writing the result lambda into out. |
SLLaplace #sleela 2.5 (lib/math/SLLaplace.sleela)
SLLaplace class
Defines the SLeeLa standard-library type SLLaplace used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
reduceAngle | double reduceAngle(double x) | No description in source. |
sinv | double sinv(double x) | No description in source. |
cosv | double cosv(double x) | No description in source. |
expNeg | double expNeg(double x) | No description in source. |
transform | double transform(double[] f, int n, double dt, double s) | No description in source. |
SLLcm #sleela 2.5 (lib/math/SLLcm.sleela)
SLLcm class
Defines the SLeeLa standard-library type SLLcm used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
gcd | int gcd(int a, int b) | Least common multiple via gcd: lcm(a,b) = |a*b| / gcd(a,b). |
compute | int compute(int a, int b) | No description in source. |
SLLeastSquares #sleela 2.5 (lib/math/SLLeastSquares.sleela)
SLLeastSquares class
Defines the SLeeLa standard-library type SLLeastSquares used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
fit | void fit(double[] xs, double[] ys, int n, double[] out) | No description in source. |
SLLimit #sleela 2.5 (lib/math/SLLimit.sleela)
SLLimit class
Defines the SLeeLa standard-library type SLLimit used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
estimate | double estimate(double[] samples, int n) | No description in source. |
converging | boolean converging(double[] samples, int n, double tol) | No description in source. |
SLLine #sleela 2.5 (lib/math/SLLine.sleela)
SLLine class
Defines the SLeeLa standard-library type SLLine used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
slope | double slope | A line in slope-intercept form y = m x + b, with a vertical flag. |
intercept | double intercept | No description in source. |
vertical | boolean vertical | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
fromPoints | void fromPoints(double x1, double y1, double x2, double y2) | No description in source. |
at | double at(double x) | No description in source. |
parallelTo | boolean parallelTo(SLLine o) | No description in source. |
getSlope | double getSlope() | No description in source. |
SLLinearAlgebra #sleela 2.5 (lib/math/SLLinearAlgebra.sleela)
SLLinearAlgebra class
Defines the SLeeLa standard-library type SLLinearAlgebra used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
matVec | void matVec(double[] a, double[] x, double[] y, int r, int c) | Matrix-vector product y = A(r x c) * x. |
trace | double trace(double[] a, int n) | Trace of an n x n matrix (sum of the diagonal). |
SLLinearProgram #sleela 2.5 (lib/math/SLLinearProgram.sleela)
SLLinearProgram class
Defines the SLeeLa standard-library type SLLinearProgram used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
objective | double objective(double[] c, double[] x, int n) | No description in source. |
feasible | boolean feasible(double[] a, double[] b, double[] x, int m, int n, double tol) | Feasible if A x <= b for all m rows (A row-major m x n). |
SLLinearRegression #sleela 2.5 (lib/math/SLLinearRegression.sleela)
SLLinearRegression class
Defines the SLeeLa standard-library type SLLinearRegression used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
slope | double slope | No description in source. |
intercept | double intercept | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
fit | void fit(double[] xs, double[] ys, int n) | No description in source. |
predict | double predict(double x) | No description in source. |
getSlope | double getSlope() | No description in source. |
getIntercept | double getIntercept() | No description in source. |
SLLogarithm #sleela 2.5 (lib/math/SLLogarithm.sleela)
SLLogarithm class
Defines the SLeeLa standard-library type SLLogarithm used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
ln | double ln(double x) | No description in source. |
logBase | double logBase(double x, double b) | Logarithm of x in an arbitrary base b: ln(x)/ln(b). |
SLLongMath #sleela 2.5 (lib/math/SLLongMath.sleela)
SLLongMath class
Defines the SLeeLa standard-library type SLLongMath used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
maxVal | long maxVal() | No description in source. |
clampAdd | long clampAdd(long a, long b) | No description in source. |
absL | long absL(long v) | No description in source. |
sign | long sign(long v) | No description in source. |
SLLTangent #sleela 2.5 (lib/math/SLLTangent.sleela)
SLLTangent class
Defines the SLeeLa standard-library type SLLTangent used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
slope | double slope | A line tangent to a curve at a point: slope m through (x0, y0). |
x0 | double x0 | No description in source. |
y0 | double y0 | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(double m, double px, double py) | No description in source. |
at | double at(double x) | Evaluate the tangent line y = y0 + m (x - x0). |
getSlope | double getSlope() | No description in source. |
SLMachineEpsilon #sleela 2.5 (lib/math/SLMachineEpsilon.sleela)
SLMachineEpsilon class
Defines the SLeeLa standard-library type SLMachineEpsilon used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
compute | double compute() | Compute machine epsilon for double precision by halving until 1 + e == 1. |
doubleValue | double doubleValue() | No description in source. |
SLMarkovChain #sleela 2.5 (lib/math/SLMarkovChain.sleela)
SLMarkovChain class
Defines the SLeeLa standard-library type SLMarkovChain used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
n | int n | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int states) | No description in source. |
step | void step(double[] dist, double[] p, double[] out) | No description in source. |
rowStochastic | boolean rowStochastic(double[] p, double tol) | No description in source. |
SLMath #sleela 2.5 (lib/math/SLMath.sleela)
SLMath class
Defines the SLeeLa standard-library type SLMath used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
pi | double pi() | No description in source. |
e | double e() | No description in source. |
absD | double absD(double x) | No description in source. |
maxD | double maxD(double a, double b) | No description in source. |
minD | double minD(double a, double b) | No description in source. |
hypot | double hypot(double a, double b) | No description in source. |
SLMathContext #sleela 2.5 (lib/math/SLMathContext.sleela)
SLMathContext class
Defines the SLeeLa standard-library type SLMathContext used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
precision | int precision | No description in source. |
roundingMode | int roundingMode | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int digits, int mode) | No description in source. |
getPrecision | int getPrecision() | No description in source. |
getRoundingMode | int getRoundingMode() | No description in source. |
round | double round(double x) | No description in source. |
SLMathEngine #sleela 2.5 (lib/math/SLMathEngine.sleela)
SLMathEngine class
Defines the SLeeLa standard-library type SLMathEngine used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
apply | double apply(int op, double a, double b) | No description in source. |
SLMathEvaluator #sleela 2.5 (lib/math/SLMathEvaluator.sleela)
SLMathEvaluator class
Defines the SLeeLa standard-library type SLMathEvaluator used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
evaluate | double evaluate(int[] ops, double[] vals, int n) | Evaluate a postfix token stream (op -1 pushes vals[i], 0..3 = + - * /). |
SLMathNorms #sleela 2.5 (lib/math/SLMathNorms.sleela)
SLMathNorms class
SLMathNorms carries the math precision norms for SLeeLa -- how many digits are carried for irrational constants, repeating decimals, and Finance Verbs. The authoritative, user-editable values live in lib/math/MATH.PRECISION.NORMS.md and lib/math/math-precision-norms.json; these compiled constants are the baseline a build starts from when no config file is read.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
DEFAULT_IRRATIONAL_CARRY | static final int DEFAULT_IRRATIONAL_CARRY = 2048 | No description in source. |
DEFAULT_REPEATING_CARRY | static final int DEFAULT_REPEATING_CARRY = 58 | No description in source. |
DEFAULT_FINANCE_CARRY | static final int DEFAULT_FINANCE_CARRY = 1023 | No description in source. |
FINANCE_CARRY_FLOOR | static final int FINANCE_CARRY_FLOOR = 1023 | The hard floor below which a Finance Verb must not be configured. |
irrationalCarry | int irrationalCarry | Live values, seeded from the defaults, overridable at runtime via setters. |
repeatingCarry | int repeatingCarry | No description in source. |
financeCarry | int financeCarry | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
initDefaults | void initDefaults() | Start from the compiled defaults. |
getIrrationalCarry | int getIrrationalCarry() | No description in source. |
getRepeatingCarry | int getRepeatingCarry() | No description in source. |
getFinanceCarry | int getFinanceCarry() | No description in source. |
setIrrationalCarry | void setIrrationalCarry(int v) | No description in source. |
setRepeatingCarry | void setRepeatingCarry(int v) | No description in source. |
setFinanceCarry | boolean setFinanceCarry(int v) | No description in source. |
financeCarryValid | boolean financeCarryValid() | Is the current finance carry valid (at or above the floor)? |
financeFloor | int financeFloor() | The hard floor for finance carry, reachable without instance-static access. |
available | boolean available() | No description in source. |
SLMatrix #sleela 2.5 (lib/math/SLMatrix.sleela)
SLMatrix class
Defines the SLeeLa standard-library type SLMatrix used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
rows | int rows | Row-major dense matrix stored as a flat double[] of length rows*cols. |
cols | int cols | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
shape | void shape(int r, int c) | No description in source. |
at | double at(double[] m, int r, int c) | No description in source. |
put | void put(double[] m, int r, int c, double v) | No description in source. |
getRows | int getRows() | No description in source. |
getCols | int getCols() | No description in source. |
identity | void identity(double[] m, int n) | Identity matrix of order n written into `m`. |
SLMatrixOperations #sleela 2.5 (lib/math/SLMatrixOperations.sleela)
SLMatrixOperations class
Defines the SLeeLa standard-library type SLMatrixOperations used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
multiply | void multiply(double[] a, double[] b, double[] c, int ra, int ca, int cb) | Matrix product C = A(ra x ca) * B(ca x cb), all row-major flat arrays. |
add | void add(double[] a, double[] b, double[] c, int r, int cc) | Elementwise sum C = A + B for r x c matrices. |
scale | void scale(double[] a, double s, double[] c, int r, int cc) | Scalar multiply. |
SLMax #sleela 2.5 (lib/math/SLMax.sleela)
SLMax class
Defines the SLeeLa standard-library type SLMax used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double a, double b) | No description in source. |
ofInt | int ofInt(int a, int b) | No description in source. |
ofArray | double ofArray(double[] xs, int n) | No description in source. |
SLMean #sleela 2.5 (lib/math/SLMean.sleela)
SLMean class
Defines the SLeeLa standard-library type SLMean used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
arithmetic | double arithmetic(double[] xs, int n) | Arithmetic mean of the first n elements. |
harmonic | double harmonic(double[] xs, int n) | Harmonic mean (all elements must be nonzero). |
SLMedian #sleela 2.5 (lib/math/SLMedian.sleela)
SLMedian class
Defines the SLeeLa standard-library type SLMedian used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double[] a, int n) | Median of a copy of the data (values are sorted in place in `a`). |
sortInPlace | void sortInPlace(double[] a, int n) | No description in source. |
SLMetric #sleela 2.5 (lib/math/SLMetric.sleela)
SLMetric class
Defines the SLeeLa standard-library type SLMetric used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
euclidean | double euclidean(double[] a, double[] b, int n) | Distance metrics between two n-vectors: Euclidean, Manhattan, Chebyshev. |
manhattan | double manhattan(double[] a, double[] b, int n) | No description in source. |
chebyshev | double chebyshev(double[] a, double[] b, int n) | No description in source. |
SLMin #sleela 2.5 (lib/math/SLMin.sleela)
SLMin class
Defines the SLeeLa standard-library type SLMin used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double a, double b) | No description in source. |
ofInt | int ofInt(int a, int b) | No description in source. |
ofArray | double ofArray(double[] xs, int n) | No description in source. |
SLMode #sleela 2.5 (lib/math/SLMode.sleela)
SLMode class
Defines the SLeeLa standard-library type SLMode used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double[] xs, int n) | The most frequent value (first-seen wins on ties). O(n^2), copy-free. |
SLModulo #sleela 2.5 (lib/math/SLModulo.sleela)
SLModulo class
Defines the SLeeLa standard-library type SLModulo used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
mod | int mod(int a, int m) | Euclidean remainder that is always in [0, m) for positive m. |
powMod | long powMod(long base, long exp, long m) | Modular exponentiation of base to the power exp, modulo m, for nonnegative exp. |
SLMoment #sleela 2.5 (lib/math/SLMoment.sleela)
SLMoment class
Defines the SLeeLa standard-library type SLMoment used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
mean | double mean(double[] xs, int n) | No description in source. |
raw | double raw(double[] xs, int n, int k) | The k-th raw moment about the origin: E[X^k]. |
central | double central(double[] xs, int n, int k) | The k-th central moment about the mean. |
SLMonteCarlo #sleela 2.5 (lib/math/SLMonteCarlo.sleela)
SLMonteCarlo class
Defines the SLeeLa standard-library type SLMonteCarlo used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
estimate | double estimate(double[] samples, int n) | No description in source. |
estimatePi | double estimatePi(int inside, int n) | No description in source. |
SLMonteCarloSampler #sleela 2.5 (lib/math/SLMonteCarloSampler.sleela)
SLMonteCarloSampler class
Defines the SLeeLa standard-library type SLMonteCarloSampler used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
state | long state | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
seed | void seed(long s) | No description in source. |
nextUniform | double nextUniform(double a, double b) | No description in source. |
sample | void sample(double a, double b, int n, double[] out) | No description in source. |
SLNewtonInterpolation #sleela 2.5 (lib/math/SLNewtonInterpolation.sleela)
SLNewtonInterpolation class
Defines the SLeeLa standard-library type SLNewtonInterpolation used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
evaluate | double evaluate(double[] xs, double[] ysIn, int n, double x) | No description in source. |
SLNewtonMethod #sleela 2.5 (lib/math/SLNewtonMethod.sleela)
SLNewtonMethod class
Defines the SLeeLa standard-library type SLNewtonMethod used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
step | double step(double x, double fx, double dfx) | One Newton-Raphson update step: x minus f(x) divided by its derivative. |
SLNewtonOptimization #sleela 2.5 (lib/math/SLNewtonOptimization.sleela)
SLNewtonOptimization class
Defines the SLeeLa standard-library type SLNewtonOptimization used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
step | double step(double x, double gradient, double hessian) | No description in source. |
isMinimum | boolean isMinimum(double hessian) | No description in source. |
SLNewtonSolver #sleela 2.5 (lib/math/SLNewtonSolver.sleela)
SLNewtonSolver class
Defines the SLeeLa standard-library type SLNewtonSolver used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
step | double step(double x, double fx, double dfx) | One Newton-Raphson update step toward a root of f. |
converged | boolean converged(double xNew, double xOld, double tol) | Has the iterate converged within tol? |
SLNormalDistribution #sleela 2.5 (lib/math/SLNormalDistribution.sleela)
SLNormalDistribution class
Defines the SLeeLa standard-library type SLNormalDistribution used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
mean | double mean | No description in source. |
stdDev | double stdDev | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
expf | double expf(double x) | No description in source. |
configure | void configure(double m, double s) | No description in source. |
pdf | double pdf(double x) | No description in source. |
cdf | double cdf(double x) | No description in source. |
SLNumber #sleela 2.5 (lib/math/SLNumber.sleela)
SLNumber class
Defines the SLeeLa standard-library type SLNumber used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
kind | int kind | A tagged numeric value: kind 0 = integer (long), 1 = real (double). |
ival | long ival | No description in source. |
dval | double dval | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
setInt | void setInt(long v) | No description in source. |
setReal | void setReal(double v) | No description in source. |
asDouble | double asDouble() | No description in source. |
isInteger | boolean isInteger() | No description in source. |
SLNumeric #sleela 2.5 (lib/math/SLNumeric.sleela)
SLNumeric class
Defines the SLeeLa standard-library type SLNumeric used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
value | double value | A numeric wrapper exposing common predicates over a double value. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(double v) | No description in source. |
get | double get() | No description in source. |
isZero | boolean isZero() | No description in source. |
isPositive | boolean isPositive() | No description in source. |
isNegative | boolean isNegative() | No description in source. |
isInteger | boolean isInteger() | No description in source. |
SLNumericalDerivative #sleela 2.5 (lib/math/SLNumericalDerivative.sleela)
SLNumericalDerivative class
Defines the SLeeLa standard-library type SLNumericalDerivative used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
derivative | double derivative(double yPrev, double yNext, double h) | Three-point central difference using a step h about sampled triplet. |
secondDerivative | double secondDerivative(double yPrev, double yMid, double yNext, double h) | Second derivative via the standard three-point stencil. |
SLNumericalIntegration #sleela 2.5 (lib/math/SLNumericalIntegration.sleela)
SLNumericalIntegration class
Defines the SLeeLa standard-library type SLNumericalIntegration used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
trapezoid | double trapezoid(double[] ys, double a, double b, int n) | No description in source. |
simpson | double simpson(double[] ys, double a, double b, int n) | Composite Simpson rule (n must be even), sampled ys length n+1. |
SLNumericalMath #sleela 2.5 (lib/math/SLNumericalMath.sleela)
SLNumericalMath class
Defines the SLeeLa standard-library type SLNumericalMath used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
chop | double chop(double x, double tol) | Clamp tiny magnitudes to zero below a threshold (denormal flush). |
nearlyEqual | boolean nearlyEqual(double a, double b, double tol) | No description in source. |
SLNumericalPrecision #sleela 2.5 (lib/math/SLNumericalPrecision.sleela)
SLNumericalPrecision class
Defines the SLeeLa standard-library type SLNumericalPrecision used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
doubleEpsilon | double doubleEpsilon() | No description in source. |
nearlyEqual | boolean nearlyEqual(double a, double b, double relTol) | No description in source. |
SLNumericalRoot #sleela 2.5 (lib/math/SLNumericalRoot.sleela)
SLNumericalRoot class
Defines the SLeeLa standard-library type SLNumericalRoot used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
absd | double absd(double x) | No description in source. |
bracketed | boolean bracketed(double fa, double fb) | No description in source. |
bisect | double bisect(double a, double b) | No description in source. |
within | boolean within(double fx, double tol) | No description in source. |
SLNumericalSequence #sleela 2.5 (lib/math/SLNumericalSequence.sleela)
SLNumericalSequence class
Defines the SLeeLa standard-library type SLNumericalSequence used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
linspace | void linspace(double a, double b, int n, double[] out) | Build a linearly spaced sequence of n points from a to b into out. |
geomspace | void geomspace(double a, double r, int n, double[] out) | Build a geometric sequence a, a*r, a*r^2, ... into out. |
SLNumericalSolver #sleela 2.5 (lib/math/SLNumericalSolver.sleela)
SLNumericalSolver class
Defines the SLeeLa standard-library type SLNumericalSolver used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
solveLinear | boolean solveLinear(double[] aIn, double[] bIn, double[] x, int n) | No description in source. |
SLNumericFormatter #sleela 2.5 (lib/math/SLNumericFormatter.sleela)
SLNumericFormatter class
Defines the SLeeLa standard-library type SLNumericFormatter used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
MAX_PLACES | int MAX_PLACES = 15 | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
integerPart | long integerPart(double x) | No description in source. |
fractionalDigits | long fractionalDigits(double x, int places) | The first `places` fractional digits of |x|, as an integer (rounded). |
pow10 | double pow10(int n) | 10^n as a double, for 0 <= n <= 18. |
digitChar | String digitChar(long d) | The decimal digit 0..9 as a one-character String. |
unsignedToString | String unsignedToString(long d) | A nonnegative long as its decimal String (no sign). |
longToString | String longToString(long d) | A signed long as its decimal String. |
toFixed | String toFixed(double x, int places) | No description in source. |
stringDigitCount | int stringDigitCount(long d) | The number of decimal digits in a nonnegative long (1 for zero). |
toSignificant | String toSignificant(double x, int sig) | No description in source. |
SLNumericParser #sleela 2.5 (lib/math/SLNumericParser.sleela)
SLNumericParser class
Defines the SLeeLa standard-library type SLNumericParser used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
parseUnsigned | long parseUnsigned(int[] codes, int length) | No description in source. |
SLObjective #sleela 2.5 (lib/math/SLObjective.sleela)
SLObjective class
Defines the SLeeLa standard-library type SLObjective used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
a | double a | No description in source. |
b | double b | No description in source. |
c | double c | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(double pa, double pb, double pc) | No description in source. |
value | double value(double x) | No description in source. |
gradient | double gradient(double x) | No description in source. |
minimizer | double minimizer() | No description in source. |
SLODESolver #sleela 2.5 (lib/math/SLODESolver.sleela)
SLODESolver class
Defines the SLeeLa standard-library type SLODESolver used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
eulerStep | double eulerStep(double y, double fval, double h) | No description in source. |
heunStep | double heunStep(double y, double k1, double k2, double h) | No description in source. |
SLOptimization #sleela 2.5 (lib/math/SLOptimization.sleela)
SLOptimization class
Defines the SLeeLa standard-library type SLOptimization used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
argMin | int argMin(double[] values, int n) | No description in source. |
converged | boolean converged(double fNew, double fOld, double tol) | No description in source. |
SLOptimizationProblem #sleela 2.5 (lib/math/SLOptimizationProblem.sleela)
SLOptimizationProblem class
Defines the SLeeLa standard-library type SLOptimizationProblem used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
minimize | boolean minimize | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(boolean doMinimize) | No description in source. |
bestIndex | int bestIndex(double[] objective, int n) | No description in source. |
SLOrder #sleela 2.5 (lib/math/SLOrder.sleela)
SLOrder class
Defines the SLeeLa standard-library type SLOrder used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
compare | int compare(double a, double b) | Comparison yielding -1, 0, or 1. |
ascending | boolean ascending(double[] a, int n) | Is the array sorted ascending? |
SLOrdinaryDifferentialEquation #sleela 2.5 (lib/math/SLOrdinaryDifferentialEquation.sleela)
SLOrdinaryDifferentialEquation class
Defines the SLeeLa standard-library type SLOrdinaryDifferentialEquation used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
a | double a | No description in source. |
b | double b | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(double pa, double pb) | No description in source. |
slope | double slope(double y) | No description in source. |
eulerStep | double eulerStep(double y, double h) | No description in source. |
SLOverflow #sleela 2.5 (lib/math/SLOverflow.sleela)
SLOverflow class
Defines the SLeeLa standard-library type SLOverflow used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
maxLong | long maxLong() | No description in source. |
addOverflows | boolean addOverflows(long a, long b) | No description in source. |
mulOverflows | boolean mulOverflows(long a, long b) | Would a * b overflow? Checked by dividing the product back out. |
exceedsDouble | boolean exceedsDouble(double x, double limit) | No description in source. |
SLPackage #sleela 2.5 (lib/math/SLPackage.sleela)
SLPackage class
Defines the SLeeLa standard-library package for math.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
packageName | String packageName | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(String name) | No description in source. |
name | String name() | No description in source. |
available | boolean available() | No description in source. |
SLPartialDerivative #sleela 2.5 (lib/math/SLPartialDerivative.sleela)
SLPartialDerivative class
Defines the SLeeLa standard-library type SLPartialDerivative used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
along | double along(double fMinus, double fPlus, double h) | No description in source. |
SLPathLength #sleela 2.5 (lib/math/SLPathLength.sleela)
SLPathLength class
Defines the SLeeLa standard-library type SLPathLength used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
of | double of(double[] xs, double[] ys, int n) | Total length of a polyline through n sampled points. |
SLPDE #sleela 2.5 (lib/math/SLPDE.sleela)
SLPDE class
Defines the SLeeLa standard-library type SLPDE used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
heatStep | void heatStep(double[] u, int n, double alpha, double dx, double dt, double[] out) | No description in source. |
stabilityRatio | double stabilityRatio(double alpha, double dx, double dt) | Stability ratio r = alpha dt / dx^2; explicit scheme is stable when r <= 0.5. |
SLPercentile #sleela 2.5 (lib/math/SLPercentile.sleela)
SLPercentile class
Defines the SLeeLa standard-library type SLPercentile used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double[] a, int n, double p) | Linear-interpolation percentile p in [0,100] over sorted data `a`. |
sortInPlace | void sortInPlace(double[] a, int n) | No description in source. |
SLPermutation #sleela 2.5 (lib/math/SLPermutation.sleela)
SLPermutation class
Defines the SLeeLa standard-library type SLPermutation used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
count | long count(int n, int k) | P(n,k), the number of ordered k-arrangements of an n-set. |
total | long total(int n) | n! total permutations. |
SLPermutationGenerator #sleela 2.5 (lib/math/SLPermutationGenerator.sleela)
SLPermutationGenerator class
Defines the SLeeLa standard-library type SLPermutationGenerator used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
count | long count(int n) | Count of distinct permutations of n items = n!. |
next | boolean next(int[] a, int n) | No description in source. |
SLPhysicalConstant #sleela 2.5 (lib/math/SLPhysicalConstant.sleela)
SLPhysicalConstant class
Defines the SLeeLa standard-library type SLPhysicalConstant used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
speedOfLight | double speedOfLight() | No description in source. |
planck | double planck() | No description in source. |
elementaryCharge | double elementaryCharge() | No description in source. |
avogadro | double avogadro() | No description in source. |
boltzmann | double boltzmann() | No description in source. |
gravitation | double gravitation() | No description in source. |
SLPiReference #sleela 2.5 (lib/math/SLPiReference.sleela)
SLPiReference class
SLPiReference is the Modium static reference variable for the mathematical constant pi. It carries pi inline to the irrational-digit-carry norm (SLMathNorms.DEFAULT_IRRATIONAL_CARRY = 2048 fractional digits) as a static final String, reports its own digit count and a digit checksum, and self-verifies its leading digits against a known reference. The value is a Modium catalog static: a single authoritative, hash-checkable reference that the SLeeLa registry seeds as a default start value.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
PI | static final String PI = "3.14159265358979323846264338327950288419716939937510582097494459230781640628620899862803482534211706798214808651328230664709384460955058223172535940812848111745028410270193852110555964462294895493038196442881097566593344612847564823378678316527120190914564856692346034861045432664821339360726024914127372458700660631558817488152092096282925409171536436789259036001133053054882046652138414695194151160943305727036575959195309218611738193261179310511854807446237996274956735188575272489122793818301194912983367336244065664308602139494639522473719070217986094370277053921717629317675238467481846766940513200056812714526356082778577134275778960917363717872146844090122495343014654958537105079227968925892354201995611212902196086403441815981362977477130996051870721134999999837297804995105973173281609631859502445945534690830264252230825334468503526193118817101000313783875288658753320838142061717766914730359825349042875546873115956286388235378759375195778185778053217122680661300192787661119590921642019893809525720106548586327886593615338182796823030195203530185296899577362259941389124972177528347913151557485724245415069595082953311686172785588907509838175463746493931925506040092770167113900984882401285836160356370766010471018194295559619894676783744944825537977472684710404753464620804668425906949129331367702898915210475216205696602405803815019351125338243003558764024749647326391419927260426992279678235478163600934172164121992458631503028618297455570674983850549458858692699569092721079750930295532116534498720275596023648066549911988183479775356636980742654252786255181841757467289097777279380008164706001614524919217321721477235014144197356854816136115735255213347574184946843852332390739414333454776241686251898356948556209921922218427255025425688767179049460165346680498862723279178608578438382796797668145410095388378636095068006422512520511739298489608412848862694560424196528502221066118630674427862203919494504712371378696095636437191728746776465757396241389086583264599581339047802759009946576407895126946839835259570982582262052248940" | No description in source. |
PI_HEAD | static final String PI_HEAD = "3.141592653589793238462643383279502884197169399375105820974944" | The published head: "3." plus the first 60 fractional digits. |
PI_TAIL | static final String PI_TAIL = "59230781640628620899862803482534211706798214808651328230664709384460955058223172535940812848111745028410270193852110555964462294895493038196442881097566593344612847564823378678316527120190914564856692346034861045432664821339360726024914127372458700660631558817488152092096282925409171536436789259036001133053054882046652138414695194151160943305727036575959195309218611738193261179310511854807446237996274956735188575272489122793818301194912983367336244065664308602139494639522473719070217986094370277053921717629317675238467481846766940513200056812714526356082778577134275778960917363717872146844090122495343014654958537105079227968925892354201995611212902196086403441815981362977477130996051870721134999999837297804995105973173281609631859502445945534690830264252230825334468503526193118817101000313783875288658753320838142061717766914730359825349042875546873115956286388235378759375195778185778053217122680661300192787661119590921642019893809525720106548586327886593615338182796823030195203530185296899577362259941389124972177528347913151557485724245415069595082953311686172785588907509838175463746493931925506040092770167113900984882401285836160356370766010471018194295559619894676783744944825537977472684710404753464620804668425906949129331367702898915210475216205696602405803815019351125338243003558764024749647326391419927260426992279678235478163600934172164121992458631503028618297455570674983850549458858692699569092721079750930295532116534498720275596023648066549911988183479775356636980742654252786255181841757467289097777279380008164706001614524919217321721477235014144197356854816136115735255213347574184946843852332390739414333454776241686251898356948556209921922218427255025425688767179049460165346680498862723279178608578438382796797668145410095388378636095068006422512520511739298489608412848862694560424196528502221066118630674427862203919494504712371378696095636437191728746776465757396241389086583264599581339047802759009946576407895126946839835259570982582262052248940" | The published tail: the remaining fractional digits. PI_HEAD + PI_TAIL == PI. |
PI_HEAD_ECHO | static final String PI_HEAD_ECHO = "3.141592653589793238462643383279502884197169399375105820974944" | An independent echo of the head, for a tamper check against PI_HEAD. |
PI_REF_50 | static final String PI_REF_50 = "14159265358979323846264338327950288419716939937510" | The first 50 fractional digits, a widely published reference for pi. |
PI_HEAD_FRACTION_50 | static final String PI_HEAD_FRACTION_50 = "14159265358979323846264338327950288419716939937510" | The head with the leading "3." stripped: the first 50 then 60 digits. |
PI_DIGITS | static final int PI_DIGITS = 2048 | The number of fractional digits carried inline (the irrational-carry norm). |
PI_DIGIT_CHECKSUM | static final int PI_DIGIT_CHECKSUM = 9338 | The sum of the fractional decimal digits -- a stable integrity checksum. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
value | String value() | No description in source. |
digitCount | int digitCount() | No description in source. |
checksum | int checksum() | No description in source. |
head | String head() | The published head ("3." + first 60 fractional digits), via a method. |
verify | boolean verify() | No description in source. |
firstFiftyTwo | String firstFiftyTwo() | The first 52 characters ("3." + 50 digits), rebuilt from the reference. |
report | String report() | A one-line human report of the verification outcome. |
available | boolean available() | No description in source. |
SLPlane #sleela 2.5 (lib/math/SLPlane.sleela)
SLPlane class
Defines the SLeeLa standard-library type SLPlane used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
a | double a | No description in source. |
b | double b | No description in source. |
c | double c | No description in source. |
d | double d | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
set | void set(double pa, double pb, double pc, double pd) | No description in source. |
signedDistance | double signedDistance(double x, double y, double z) | No description in source. |
SLPoint #sleela 2.5 (lib/math/SLPoint.sleela)
SLPoint class
Defines the SLeeLa standard-library type SLPoint used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
x | double x | No description in source. |
y | double y | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
set | void set(double px, double py) | No description in source. |
distanceTo | double distanceTo(SLPoint o) | No description in source. |
getX | double getX() | No description in source. |
getY | double getY() | No description in source. |
SLPoissonDistribution #sleela 2.5 (lib/math/SLPoissonDistribution.sleela)
SLPoissonDistribution class
Defines the SLeeLa standard-library type SLPoissonDistribution used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
expf | double expf(double x) | No description in source. |
pmf | double pmf(double lambda, int k) | Probability mass lambda^k e^(-lambda) / k!. |
mean | double mean(double lambda) | No description in source. |
variance | double variance(double lambda) | No description in source. |
SLPolarCoordinate #sleela 2.5 (lib/math/SLPolarCoordinate.sleela)
SLPolarCoordinate class
Defines the SLeeLa standard-library type SLPolarCoordinate used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
r | double r | No description in source. |
theta | double theta | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
pi | double pi() | No description in source. |
reduce | double reduce(double x) | No description in source. |
sin | double sin(double x) | No description in source. |
cos | double cos(double x) | No description in source. |
set | void set(double radius, double angle) | No description in source. |
toX | double toX() | No description in source. |
toY | double toY() | No description in source. |
getR | double getR() | No description in source. |
getTheta | double getTheta() | No description in source. |
SLPolynomial #sleela 2.5 (lib/math/SLPolynomial.sleela)
SLPolynomial class
Defines the SLeeLa standard-library type SLPolynomial used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
evaluate | double evaluate(double[] coeffs, int degree, double x) | No description in source. |
derivative | void derivative(double[] coeffs, int degree, double[] out) | Derivative coefficients written into out (length degree). |
add | void add(double[] a, double[] b, double[] out, int n) | No description in source. |
SLPolynomialRegression #sleela 2.5 (lib/math/SLPolynomialRegression.sleela)
SLPolynomialRegression class
Defines the SLeeLa standard-library type SLPolynomialRegression used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
c0 | double c0 | No description in source. |
c1 | double c1 | No description in source. |
c2 | double c2 | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
fit | void fit(double[] xs, double[] ys, int n) | No description in source. |
predict | double predict(double x) | No description in source. |
SLPower #sleela 2.5 (lib/math/SLPower.sleela)
SLPower class
Defines the SLeeLa standard-library type SLPower used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
intPow | double intPow(double x, int n) | Integer power x to the n by binary exponentiation (negative n inverts). |
square | double square(double x) | Square and cube helpers. |
cube | double cube(double x) | No description in source. |
SLPrecision #sleela 2.5 (lib/math/SLPrecision.sleela)
SLPrecision class
Defines the SLeeLa standard-library type SLPrecision used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
significantDigits | int significantDigits(double relativeError) | Number of correct significant digits implied by a relative error. |
withinTolerance | boolean withinTolerance(double a, double b, double tol) | No description in source. |
epsilon | double epsilon() | The machine epsilon for IEEE-754 double precision (2^-52). |
maxDigits | int maxDigits() | The largest number of reliable significant decimal digits in a double. |
almostEqual | boolean almostEqual(double a, double b, double relTol) | No description in source. |
agreeingDigits | int agreeingDigits(double a, double b) | No description in source. |
relativeError | double relativeError(double approx, double reference) | No description in source. |
SLPredicate #sleela 2.5 (lib/math/SLPredicate.sleela)
SLPredicate class
Defines the SLeeLa standard-library type SLPredicate used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
kind | int kind | No description in source. |
threshold | double threshold | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(int k, double t) | No description in source. |
test | boolean test(double x) | No description in source. |
SLPrime #sleela 2.5 (lib/math/SLPrime.sleela)
SLPrime class
Defines the SLeeLa standard-library type SLPrime used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
isPrime | boolean isPrime(int n) | Primality test by trial division up to sqrt(n). |
nextPrime | int nextPrime(int n) | The next prime strictly greater than n. |
SLPrimeFactorization #sleela 2.5 (lib/math/SLPrimeFactorization.sleela)
SLPrimeFactorization class
Defines the SLeeLa standard-library type SLPrimeFactorization used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
factorCount | int factorCount(int n) | Count the prime factors of n with multiplicity, for n of at least 1. |
largestFactor | int largestFactor(int n) | The largest prime factor of n. |
SLProbability #sleela 2.5 (lib/math/SLProbability.sleela)
SLProbability class
Defines the SLeeLa standard-library type SLProbability used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
clamp | double clamp(double p) | Clamp a raw value to a valid probability in [0, 1]. |
complement | double complement(double p) | No description in source. |
andIndependent | double andIndependent(double a, double b) | Probability of independent events both occurring. |
orExclusive | double orExclusive(double a, double b) | Probability of either of two mutually-exclusive events. |
orIndependent | double orIndependent(double a, double b) | Inclusive-or for independent events: a + b - a*b. |
SLProbabilityDensity #sleela 2.5 (lib/math/SLProbabilityDensity.sleela)
SLProbabilityDensity class
Defines the SLeeLa standard-library type SLProbabilityDensity used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
normalPdf | double normalPdf(double x, double mean, double stdDev) | Standard-normal probability density function at x. |
expNeg | double expNeg(double t) | e to the minus t for nonnegative t, via a Taylor series on the argument. |
SLProbabilityMass #sleela 2.5 (lib/math/SLProbabilityMass.sleela)
SLProbabilityMass class
Defines the SLeeLa standard-library type SLProbabilityMass used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
valid | boolean valid(double[] probs, int n, double tol) | Validate that a discrete PMF over n outcomes sums to 1 (within tol). |
cumulative | double cumulative(double[] probs, int k) | Cumulative mass through index k inclusive. |
SLProduct #sleela 2.5 (lib/math/SLProduct.sleela)
SLProduct class
Defines the SLeeLa standard-library type SLProduct used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double[] xs, int n) | No description in source. |
times | double times(double a, double b) | No description in source. |
SLProgression #sleela 2.5 (lib/math/SLProgression.sleela)
SLProgression class
Defines the SLeeLa standard-library type SLProgression used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
arithmeticTerm | double arithmeticTerm(double a, double d, int k) | Arithmetic progression: n-th term a + (n-1) d (1-indexed). |
arithmeticSum | double arithmeticSum(double a, double d, int k) | Sum of the first k arithmetic terms. |
geometricTerm | double geometricTerm(double a, double r, int k) | Geometric progression: n-th term a r^(n-1). |
geometricSum | double geometricSum(double a, double r, int k) | Sum of the first k geometric terms. |
SLQuadraticProgram #sleela 2.5 (lib/math/SLQuadraticProgram.sleela)
SLQuadraticProgram class
Defines the SLeeLa standard-library type SLQuadraticProgram used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
objective | double objective(double[] q, double[] c, double[] x, int n) | No description in source. |
gradient | void gradient(double[] q, double[] c, double[] x, int n, double[] out) | No description in source. |
SLQuantity #sleela 2.5 (lib/math/SLQuantity.sleela)
SLQuantity class
Defines the SLeeLa standard-library type SLQuantity used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
magnitude | double magnitude | A physical quantity: a numeric magnitude paired with a unit scale to SI. |
unitScale | double unitScale | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(double m, double scaleToSI) | No description in source. |
inSI | double inSI() | No description in source. |
getMagnitude | double getMagnitude() | No description in source. |
add | void add(SLQuantity o) | No description in source. |
SLQuaternion #sleela 2.5 (lib/math/SLQuaternion.sleela)
SLQuaternion class
Defines the SLeeLa standard-library type SLQuaternion used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
w | double w | No description in source. |
x | double x | No description in source. |
y | double y | No description in source. |
z | double z | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
set | void set(double pw, double px, double py, double pz) | No description in source. |
norm | double norm() | No description in source. |
multiply | void multiply(SLQuaternion o, SLQuaternion out) | Hamilton product this * o written into out (w,x,y,z). |
conjugate | void conjugate(SLQuaternion out) | No description in source. |
SLRandomDistribution #sleela 2.5 (lib/math/SLRandomDistribution.sleela)
SLRandomDistribution class
Defines the SLeeLa standard-library type SLRandomDistribution used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sampleIndex | int sampleIndex(double[] cumulative, int n, double u) | No description in source. |
toCumulative | void toCumulative(double[] probs, int n, double[] out) | Build a cumulative array from probabilities. |
SLRandomGenerator #sleela 2.5 (lib/math/SLRandomGenerator.sleela)
SLRandomGenerator class
Defines the SLeeLa standard-library type SLRandomGenerator used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
state | long state | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
seed | void seed(long s) | No description in source. |
nextLong | long nextLong() | No description in source. |
next | double next() | No description in source. |
nextInt | int nextInt(int bound) | No description in source. |
SLRandomVariable #sleela 2.5 (lib/math/SLRandomVariable.sleela)
SLRandomVariable class
Defines the SLeeLa standard-library type SLRandomVariable used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
expectation | double expectation(double[] values, double[] probs, int n) | No description in source. |
variance | double variance(double[] values, double[] probs, int n) | No description in source. |
SLRational #sleela 2.5 (lib/math/SLRational.sleela)
SLRational class
Defines the SLeeLa standard-library type SLRational used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
num | int num | No description in source. |
den | int den | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
gcd | int gcd(int a, int b) | No description in source. |
set | void set(int n, int d) | No description in source. |
toDouble | double toDouble() | No description in source. |
getNum | int getNum() | No description in source. |
getDen | int getDen() | No description in source. |
SLRay #sleela 2.5 (lib/math/SLRay.sleela)
SLRay class
Defines the SLeeLa standard-library type SLRay used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
ox | double ox | No description in source. |
oy | double oy | No description in source. |
dx | double dx | No description in source. |
dy | double dy | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(double originX, double originY, double dirX, double dirY) | No description in source. |
pointX | double pointX(double t) | No description in source. |
pointY | double pointY(double t) | No description in source. |
SLReciprocal #sleela 2.5 (lib/math/SLReciprocal.sleela)
SLReciprocal class
Defines the SLeeLa standard-library type SLReciprocal used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double x) | The multiplicative inverse 1/x; returns 0.0 for x == 0 (no infinity). |
defined | boolean defined(double x) | No description in source. |
SLRecurrence #sleela 2.5 (lib/math/SLRecurrence.sleela)
SLRecurrence class
Defines the SLeeLa standard-library type SLRecurrence used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
evaluate | double evaluate(double x0, double x1, double p, double q, int k) | No description in source. |
SLRecurrenceSolver #sleela 2.5 (lib/math/SLRecurrenceSolver.sleela)
SLRecurrenceSolver class
Defines the SLeeLa standard-library type SLRecurrenceSolver used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
characteristicRoots | boolean characteristicRoots(double p, double q, double[] out) | No description in source. |
SLRegression #sleela 2.5 (lib/math/SLRegression.sleela)
SLRegression class
Defines the SLeeLa standard-library type SLRegression used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
slope | double slope | No description in source. |
intercept | double intercept | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
fit | void fit(double[] xs, double[] ys, int n) | No description in source. |
predict | double predict(double x) | No description in source. |
SLRegressionModel #sleela 2.5 (lib/math/SLRegressionModel.sleela)
SLRegressionModel class
Defines the SLeeLa standard-library type SLRegressionModel used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
slope | double slope | A fitted linear model plus its coefficient of determination R^2. |
intercept | double intercept | No description in source. |
rSquared | double rSquared | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
fit | void fit(double[] xs, double[] ys, int n) | No description in source. |
getRSquared | double getRSquared() | No description in source. |
predict | double predict(double x) | No description in source. |
SLRegularization #sleela 2.5 (lib/math/SLRegularization.sleela)
SLRegularization class
Defines the SLeeLa standard-library type SLRegularization used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
l2Penalty | double l2Penalty(double[] w, int n, double lambda) | No description in source. |
l1Penalty | double l1Penalty(double[] w, int n, double lambda) | No description in source. |
SLRelation #sleela 2.5 (lib/math/SLRelation.sleela)
SLRelation class
Defines the SLeeLa standard-library type SLRelation used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
n | int n | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int size) | No description in source. |
reflexive | boolean reflexive(int[] r) | No description in source. |
symmetric | boolean symmetric(int[] r) | No description in source. |
transitive | boolean transitive(int[] r) | No description in source. |
SLResidual #sleela 2.5 (lib/math/SLResidual.sleela)
SLResidual class
Defines the SLeeLa standard-library type SLResidual used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
absd | double absd(double x) | No description in source. |
of | double of(double[] row, double[] x, double b, int n) | Residual r = b - A*x for one equation row (dot of row with x). |
normInf | double normInf(double[] r, int n) | No description in source. |
SLRoot #sleela 2.5 (lib/math/SLRoot.sleela)
SLRoot class
Defines the SLeeLa standard-library type SLRoot used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
nthRoot | double nthRoot(double x, int n) | Real n-th root of x for odd n (or nonnegative x) via Newton iteration. |
squareRoot | double squareRoot(double x) | No description in source. |
SLRootFinder #sleela 2.5 (lib/math/SLRootFinder.sleela)
SLRootFinder class
Defines the SLeeLa standard-library type SLRootFinder used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
absd | double absd(double x) | No description in source. |
signChange | boolean signChange(double fa, double fb) | Fixed-point / sign test helpers for a sampled root search. |
bisectStep | double bisectStep(double a, double b) | No description in source. |
within | boolean within(double fx, double tol) | No description in source. |
SLRotation #sleela 2.5 (lib/math/SLRotation.sleela)
SLRotation class
Defines the SLeeLa standard-library type SLRotation used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
pi | double pi() | No description in source. |
reduce | double reduce(double x) | No description in source. |
sin | double sin(double x) | No description in source. |
cos | double cos(double x) | No description in source. |
rotate2D | void rotate2D(double x, double y, double theta, double[] out) | No description in source. |
SLRounding #sleela 2.5 (lib/math/SLRounding.sleela)
SLRounding class
Defines the SLeeLa standard-library type SLRounding used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
nearest | long nearest(double x) | Round half-up to the nearest integer (as a long). |
floorOf | long floorOf(double x) | No description in source. |
ceilOf | long ceilOf(double x) | No description in source. |
truncate | double truncate(double x) | No description in source. |
SLRungeKutta #sleela 2.5 (lib/math/SLRungeKutta.sleela)
SLRungeKutta class
Defines the SLeeLa standard-library type SLRungeKutta used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
step | double step(double y, double k1, double k2, double k3, double k4, double h) | No description in source. |
stageOffset | double stageOffset(int stage, double h) | No description in source. |
SLScalarField #sleela 2.5 (lib/math/SLScalarField.sleela)
SLScalarField class
Defines the SLeeLa standard-library type SLScalarField used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
w | int w | No description in source. |
h | int h | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int width, int height) | No description in source. |
at | double at(double[] grid, int x, int y) | No description in source. |
gradX | double gradX(double[] grid, int x, int y, double spacing) | Gradient component along x at an interior cell by central difference. |
SLScale #sleela 2.5 (lib/math/SLScale.sleela)
SLScale class
Defines the SLeeLa standard-library type SLScale used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
scale2D | void scale2D(double x, double y, double sx, double sy, double[] out) | Scale a point about the origin by (sx, sy), written into out. |
uniform | double uniform(double v, double factor) | No description in source. |
SLSecantMethod #sleela 2.5 (lib/math/SLSecantMethod.sleela)
SLSecantMethod class
Defines the SLeeLa standard-library type SLSecantMethod used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
step | double step(double x0, double x1, double f0, double f1) | One secant update using the two previous iterates and their f-values. |
SLSeededRandom #sleela 2.5 (lib/math/SLSeededRandom.sleela)
SLSeededRandom class
Defines the SLeeLa standard-library type SLSeededRandom used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
state | long state | No description in source. |
initial | long initial | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
seed | void seed(long s) | No description in source. |
reset | void reset() | No description in source. |
next | double next() | No description in source. |
SLSequence #sleela 2.5 (lib/math/SLSequence.sleela)
SLSequence class
Defines the SLeeLa standard-library type SLSequence used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
terms | double[] terms | No description in source. |
n | int n | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int count) | No description in source. |
setTerm | void setTerm(int i, double v) | No description in source. |
getTerm | double getTerm(int i) | No description in source. |
length | int length() | No description in source. |
sum | double sum() | No description in source. |
SLSeries #sleela 2.5 (lib/math/SLSeries.sleela)
SLSeries class
Defines the SLeeLa standard-library type SLSeries used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
partialSum | double partialSum(double[] terms, int k) | Partial sum of a sampled series (first k terms). |
geometricLimit | double geometricLimit(double a, double r) | Geometric series limit a/(1-r) for |r| < 1. |
SLSeriesExpansion #sleela 2.5 (lib/math/SLSeriesExpansion.sleela)
SLSeriesExpansion class
Defines the SLeeLa standard-library type SLSeriesExpansion used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
expSeries | double expSeries(double x, int n) | e^x partial sum through n terms (Maclaurin). |
geometricSeries | double geometricSeries(double x, int n) | Geometric 1/(1-x) partial sum through n terms, |x| < 1. |
SLSetOperations #sleela 2.5 (lib/math/SLSetOperations.sleela)
SLSetOperations class
Defines the SLeeLa standard-library type SLSetOperations used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
contains | boolean contains(int[] a, int na, int v) | No description in source. |
union | int union(int[] a, int na, int[] b, int nb, int[] out) | No description in source. |
intersection | int intersection(int[] a, int na, int[] b, int nb, int[] out) | Intersection of a and b into out; returns its size. |
difference | int difference(int[] a, int na, int[] b, int nb, int[] out) | Difference a minus b into out; returns its size. |
SLSetTheory #sleela 2.5 (lib/math/SLSetTheory.sleela)
SLSetTheory class
Defines the SLeeLa standard-library type SLSetTheory used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
contains | boolean contains(int[] a, int na, int v) | Does the sorted set `a` (length na) contain value v? |
subset | boolean subset(int[] a, int na, int[] b, int nb) | Is `a` a subset of `b`? |
cardinality | int cardinality(int[] a, int na) | No description in source. |
SLSignal #sleela 2.5 (lib/math/SLSignal.sleela)
SLSignal class
Defines the SLeeLa standard-library type SLSignal used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
energy | double energy(double[] x, int n) | A sampled discrete signal with energy, power, and convolution helpers. |
rms | double rms(double[] x, int n) | No description in source. |
convolve | void convolve(double[] x, int n, double[] h, int m, double[] out) | No description in source. |
SLSignum #sleela 2.5 (lib/math/SLSignum.sleela)
SLSignum class
Defines the SLeeLa standard-library type SLSignum used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
ofDouble | int ofDouble(double x) | The sign of x: -1, 0, or +1. |
ofInt | int ofInt(int x) | No description in source. |
SLSimpsonRule #sleela 2.5 (lib/math/SLSimpsonRule.sleela)
SLSimpsonRule class
Defines the SLeeLa standard-library type SLSimpsonRule used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
composite | double composite(double[] ys, double a, double b, int n) | Composite Simpson rule over sampled ys (length n+1), n even, on [a,b]. |
SLSine #sleela 2.5 (lib/math/SLSine.sleela)
SLSine class
Defines the SLeeLa standard-library type SLSine used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
pi | double pi() | No description in source. |
reduce | double reduce(double x) | No description in source. |
sin | double sin(double x) | No description in source. |
cos | double cos(double x) | No description in source. |
of | double of(double x) | No description in source. |
SLSkewness #sleela 2.5 (lib/math/SLSkewness.sleela)
SLSkewness class
Defines the SLeeLa standard-library type SLSkewness used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
mean | double mean(double[] xs, int n) | No description in source. |
of | double of(double[] xs, int n) | Population skewness: m3 / m2^(3/2). |
SLSpline #sleela 2.5 (lib/math/SLSpline.sleela)
SLSpline class
Defines the SLeeLa standard-library type SLSpline used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
linearSegment | double linearSegment(double y0, double y1, double t) | No description in source. |
catmullTangent | double catmullTangent(double[] ys, int i, int n) | Catmull-Rom tangent at point i from its neighbours. |
SLStandardDeviation #sleela 2.5 (lib/math/SLStandardDeviation.sleela)
SLStandardDeviation class
Defines the SLeeLa standard-library type SLStandardDeviation used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
mean | double mean(double[] xs, int n) | No description in source. |
population | double population(double[] xs, int n) | Population standard deviation. |
sample | double sample(double[] xs, int n) | Sample standard deviation (n-1 denominator). |
SLStandardError #sleela 2.5 (lib/math/SLStandardError.sleela)
SLStandardError class
Defines the SLeeLa standard-library type SLStandardError used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
ofMean | double ofMean(double sampleStdDev, int n) | Standard error of the mean: s / sqrt(n). |
SLStatistics #sleela 2.5 (lib/math/SLStatistics.sleela)
SLStatistics class
Defines the SLeeLa standard-library type SLStatistics used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
mean | double mean(double[] xs, int n) | No description in source. |
variancePopulation | double variancePopulation(double[] xs, int n) | No description in source. |
stdDevPopulation | double stdDevPopulation(double[] xs, int n) | No description in source. |
range | double range(double[] xs, int n) | No description in source. |
SLSum #sleela 2.5 (lib/math/SLSum.sleela)
SLSum class
Defines the SLeeLa standard-library type SLSum used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double[] xs, int n) | No description in source. |
kahan | double kahan(double[] xs, int n) | Kahan-compensated summation for improved accuracy. |
plus | double plus(double a, double b) | No description in source. |
SLSymbolicMath #sleela 2.5 (lib/math/SLSymbolicMath.sleela)
SLSymbolicMath class
Defines the SLeeLa standard-library type SLSymbolicMath used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
newExp | int newExp | Symbolic rules over monomials represented as (coefficient, exponent) pairs: differentiation and integration of a single power term. >> d/dx of c x^n is (c n) x^(n-1); returns the new coefficient; newExp via field. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
differentiate | double differentiate(double c, int n) | No description in source. |
integrate | double integrate(double c, int n) | Indefinite integral of c x^n is (c/(n+1)) x^(n+1); newExp holds n+1. |
getNewExp | int getNewExp() | No description in source. |
SLSymmetricDifference #sleela 2.5 (lib/math/SLSymmetricDifference.sleela)
SLSymmetricDifference class
Defines the SLeeLa standard-library type SLSymmetricDifference used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
contains | boolean contains(int[] a, int na, int v) | No description in source. |
of | int of(int[] a, int na, int[] b, int nb, int[] out) | Elements in exactly one of a or b, written into out; returns the size. |
SLTangent #sleela 2.5 (lib/math/SLTangent.sleela)
SLTangent class
Defines the SLeeLa standard-library type SLTangent used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
pi | double pi() | No description in source. |
reduce | double reduce(double x) | No description in source. |
sin | double sin(double x) | No description in source. |
cos | double cos(double x) | No description in source. |
of | double of(double x) | No description in source. |
SLTensor #sleela 2.5 (lib/math/SLTensor.sleela)
SLTensor class
Defines the SLeeLa standard-library type SLTensor used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
shape | int[] shape | No description in source. |
rank | int rank | No description in source. |
total | int total | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(int[] dims, int k) | No description in source. |
offset | int offset(int[] coord) | No description in source. |
size | int size() | No description in source. |
getRank | int getRank() | No description in source. |
SLTerm #sleela 2.5 (lib/math/SLTerm.sleela)
SLTerm class
Defines the SLeeLa standard-library type SLTerm used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
coefficient | double coefficient | A monomial term coefficient * x^exponent. |
exponent | int exponent | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
set | void set(double c, int e) | No description in source. |
evaluate | double evaluate(double x) | No description in source. |
derivativeCoefficient | double derivativeCoefficient() | No description in source. |
SLTopology #sleela 2.5 (lib/math/SLTopology.sleela)
SLTopology class
Defines the SLeeLa standard-library type SLTopology used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
lo | double lo | No description in source. |
hi | double hi | No description in source. |
closedLow | boolean closedLow | No description in source. |
closedHigh | boolean closedHigh | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(double a, double b, boolean cl, boolean ch) | No description in source. |
contains | boolean contains(double x) | No description in source. |
isBoundary | boolean isBoundary(double x) | No description in source. |
SLTransform #sleela 2.5 (lib/math/SLTransform.sleela)
SLTransform class
Defines the SLeeLa standard-library type SLTransform used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
pi | double pi() | No description in source. |
reduce | double reduce(double x) | No description in source. |
sin | double sin(double x) | No description in source. |
cos | double cos(double x) | No description in source. |
identity | void identity(double[] m) | No description in source. |
apply | void apply(double[] m, double x, double y, double[] out) | No description in source. |
SLTranslation #sleela 2.5 (lib/math/SLTranslation.sleela)
SLTranslation class
Defines the SLeeLa standard-library type SLTranslation used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
translate2D | void translate2D(double x, double y, double tx, double ty, double[] out) | Translate a point by (tx, ty), written into out. |
SLTranspose #sleela 2.5 (lib/math/SLTranspose.sleela)
SLTranspose class
Defines the SLeeLa standard-library type SLTranspose used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | void of(double[] a, double[] out, int r, int c) | Transpose an r x c row-major matrix into out (c x r). |
SLTrapezoidRule #sleela 2.5 (lib/math/SLTrapezoidRule.sleela)
SLTrapezoidRule class
Defines the SLeeLa standard-library type SLTrapezoidRule used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
panel | double panel(double ya, double yb, double h) | One trapezoid panel area. |
composite | double composite(double[] ys, double a, double b, int n) | Composite rule over sampled ys (length n+1) on [a,b]. |
SLTrigonometry #sleela 2.5 (lib/math/SLTrigonometry.sleela)
SLTrigonometry class
Defines the SLeeLa standard-library type SLTrigonometry used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
pi | double pi() | No description in source. |
reduce | double reduce(double x) | No description in source. |
sin | double sin(double x) | No description in source. |
cos | double cos(double x) | No description in source. |
tan | double tan(double x) | No description in source. |
degToRad | double degToRad(double d) | No description in source. |
radToDeg | double radToDeg(double r) | No description in source. |
SLTTest #sleela 2.5 (lib/math/SLTTest.sleela)
SLTTest class
Defines the SLeeLa standard-library type SLTTest used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
mean | double mean(double[] xs, int n) | No description in source. |
oneSample | double oneSample(double[] xs, int n, double mu0) | No description in source. |
SLUnderflow #sleela 2.5 (lib/math/SLUnderflow.sleela)
SLUnderflow class
Defines the SLeeLa standard-library type SLUnderflow used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
smallestNormal | double smallestNormal() | No description in source. |
underflows | boolean underflows(double x, double threshold) | Has a magnitude underflowed below a working threshold (flushed to zero)? |
flush | double flush(double x, double threshold) | No description in source. |
SLUniformDistribution #sleela 2.5 (lib/math/SLUniformDistribution.sleela)
SLUniformDistribution class
Defines the SLeeLa standard-library type SLUniformDistribution used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
a | double a | No description in source. |
b | double b | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(double lo, double hi) | No description in source. |
pdf | double pdf(double x) | No description in source. |
cdf | double cdf(double x) | No description in source. |
mean | double mean() | No description in source. |
variance | double variance() | No description in source. |
SLUnion #sleela 2.5 (lib/math/SLUnion.sleela)
SLUnion class
Defines the SLeeLa standard-library type SLUnion used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
contains | boolean contains(int[] a, int na, int v) | No description in source. |
of | int of(int[] a, int na, int[] b, int nb, int[] out) | No description in source. |
SLUnit #sleela 2.5 (lib/math/SLUnit.sleela)
SLUnit class
Defines the SLeeLa standard-library type SLUnit used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
scale | double scale | No description in source. |
offset | double offset | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
configure | void configure(double s, double o) | No description in source. |
toBase | double toBase(double raw) | No description in source. |
fromBase | double fromBase(double si) | No description in source. |
SLUnitConverter #sleela 2.5 (lib/math/SLUnitConverter.sleela)
SLUnitConverter class
Defines the SLeeLa standard-library type SLUnitConverter used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
convert | double convert(double value, double srcScale, double srcOffset, | No description in source. |
celsiusToFahrenheit | double celsiusToFahrenheit(double c) | Celsius to Fahrenheit convenience. |
SLVariable #sleela 2.5 (lib/math/SLVariable.sleela)
SLVariable class
Defines the SLeeLa standard-library type SLVariable used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
nameValue | String nameValue | No description in source. |
value | double value | No description in source. |
bound | boolean bound | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
bind | void bind(String n, double v) | No description in source. |
unbind | void unbind() | No description in source. |
get | double get() | No description in source. |
isBound | boolean isBound() | No description in source. |
variableName | String variableName() | No description in source. |
SLVariance #sleela 2.5 (lib/math/SLVariance.sleela)
SLVariance class
Defines the SLeeLa standard-library type SLVariance used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
mean | double mean(double[] xs, int n) | No description in source. |
population | double population(double[] xs, int n) | Population variance (divides by n). |
sample | double sample(double[] xs, int n) | Sample variance (divides by n-1, Bessel correction). |
SLVector #sleela 2.5 (lib/math/SLVector.sleela)
SLVector class
Defines the SLeeLa standard-library type SLVector used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
dot | double dot(double[] a, double[] b, int n) | Dense n-vector operations over caller-held double[] arrays. |
norm | double norm(double[] a, int n) | No description in source. |
add | void add(double[] a, double[] b, double[] out, int n) | No description in source. |
scale | void scale(double[] a, double s, double[] out, int n) | No description in source. |
SLVector2 #sleela 2.5 (lib/math/SLVector2.sleela)
SLVector2 class
Defines the SLeeLa standard-library type SLVector2 used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
x | double x | No description in source. |
y | double y | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
set | void set(double px, double py) | No description in source. |
dot | double dot(SLVector2 o) | No description in source. |
length | double length() | No description in source. |
cross | double cross(SLVector2 o) | No description in source. |
add | void add(SLVector2 o) | No description in source. |
scale | void scale(double s) | No description in source. |
getX | double getX() | No description in source. |
getY | double getY() | No description in source. |
SLVector3 #sleela 2.5 (lib/math/SLVector3.sleela)
SLVector3 class
Defines the SLeeLa standard-library type SLVector3 used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
x | double x | No description in source. |
y | double y | No description in source. |
z | double z | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
set | void set(double px, double py, double pz) | No description in source. |
dot | double dot(SLVector3 o) | No description in source. |
length | double length() | No description in source. |
add | void add(SLVector3 o) | No description in source. |
scale | void scale(double s) | No description in source. |
cross | void cross(SLVector3 o, SLVector3 out) | Cross product written into `out`. |
getX | double getX() | No description in source. |
getY | double getY() | No description in source. |
getZ | double getZ() | No description in source. |
SLVector4 #sleela 2.5 (lib/math/SLVector4.sleela)
SLVector4 class
Defines the SLeeLa standard-library type SLVector4 used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
x | double x | No description in source. |
y | double y | No description in source. |
z | double z | No description in source. |
w | double w | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
set | void set(double px, double py, double pz, double pw) | No description in source. |
dot | double dot(SLVector4 o) | No description in source. |
length | double length() | No description in source. |
scale | void scale(double s) | No description in source. |
SLVectorField #sleela 2.5 (lib/math/SLVectorField.sleela)
SLVectorField class
Defines the SLeeLa standard-library type SLVectorField used within the math library family.
Fields — the named values this unit stores.
| Field | Declaration | What it holds |
|---|---|---|
w | int w | No description in source. |
h | int h | No description in source. |
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
configure | void configure(int width, int height) | No description in source. |
divergence | double divergence(double[] u, double[] v, int x, int y, double spacing) | No description in source. |
magnitude | double magnitude(double ux, double vy) | No description in source. |
SLVectorNorm #sleela 2.5 (lib/math/SLVectorNorm.sleela)
SLVectorNorm class
Defines the SLeeLa standard-library type SLVectorNorm used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
sqrt | double sqrt(double x) | No description in source. |
l1 | double l1(double[] a, int n) | L1 (taxicab) norm. |
l2 | double l2(double[] a, int n) | L2 (Euclidean) norm. |
lInf | double lInf(double[] a, int n) | L-infinity (maximum absolute component) norm. |
SLVectorProjection #sleela 2.5 (lib/math/SLVectorProjection.sleela)
SLVectorProjection class
Defines the SLeeLa standard-library type SLVectorProjection used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
coefficient | double coefficient(double[] a, double[] b, int n) | Scalar projection of a onto b: (a.b)/|b|^2 as the coefficient. |
project | void project(double[] a, double[] b, double[] out, int n) | Vector projection of a onto b, written into `out`. |
SLZScore #sleela 2.5 (lib/math/SLZScore.sleela)
SLZScore class
Defines the SLeeLa standard-library type SLZScore used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
of | double of(double x, double mean, double stdDev) | The standard score (x - mean) / stddev. |
unstandardize | double unstandardize(double z, double mean, double stdDev) | Recover the raw value from a z-score. |
SLZTransform #sleela 2.5 (lib/math/SLZTransform.sleela)
SLZTransform class
Defines the SLeeLa standard-library type SLZTransform used within the math library family.
Methods — the actions this unit can perform.
| Method | Signature | What it does |
|---|---|---|
evaluateReal | double evaluateReal(double[] x, int n, double z) | No description in source. |