# Solid-State Drives — Specification (ssd) A solid-state drive stores data in NAND flash with no moving parts. `lib/operating-system/ssd` models the finite set of variants by the dimensions that distinguish real drives: host interface, form factor, NAND cell type, capacity, and throughput. ## Host interface | Interface | Link | Representative seq. read | Representative seq. write | |---|---|---:|---:| | SATA III | 6 Gb/s | ~560 MB/s | ~530 MB/s | | NVMe PCIe 3.0 x4 | ~3.9 GB/s | ~3,500 MB/s | ~3,000 MB/s | | NVMe PCIe 4.0 x4 | ~7.9 GB/s | ~7,000 MB/s | ~5,500 MB/s | | NVMe PCIe 5.0 x4 | ~15.8 GB/s | ~14,000 MB/s | ~12,000 MB/s | SATA throughput is capped by the 6 Gb/s link; NVMe runs the NVM Express command set directly over PCIe lanes. Values are representative flagship figures the SLeeLa classes carry as defaults; refine with `setThroughput`. ## Form factors - **2.5"** — SATA drives in a laptop/desktop bay. - **M.2 2280** — the common NVMe gumstick (22 mm × 80 mm). - **U.2 / U.3** — enterprise 2.5" NVMe. - **AIC** — PCIe add-in card. ## NAND cell type | Type | Bits/cell | Endurance | Use | |---|---:|---|---| | SLC | 1 | highest | cache / enterprise write-heavy | | MLC | 2 | high | legacy high-end | | TLC | 3 | moderate | mainstream (most consumer drives) | | QLC | 4 | lower | high-capacity, read-centric | ## Manufacturers NAND fabs and SSD brands include **Samsung**, **SK Hynix** (incl. **Solidigm**), **Micron** (consumer brand **Crucial**), **Western Digital/SanDisk**, **Kingston**, **Seagate**, **Intel**, **Corsair**, and **Sabrent**. `SLSSDCatalog` exposes representative models from each by name (e.g. Samsung `990 PRO`, WD `WD_BLACK SN850X`, Crucial `T700`). ## Mapping into the Sleela VM `SLSSD.capacityBlocks()` converts capacity + logical block size into the VM block count. When an SSD is selected as the boot disk, `SLMachineModel` passes that to the VM's block store (the same block interface `lib/cpu/SLHardDrive` uses), with `MEDIA_SSD` media so the machine boots from solid-state storage.