# DDR SDRAM — Specification (memory-ddr) Double Data Rate Synchronous DRAM transfers data on both the rising and falling edges of the clock. The family is standardized by JEDEC and advances in discrete generations; `lib/operating-system/memory-ddr` models that finite set by name. ## Generations | Generation | Representative module standard | Data rate (MT/s) | Typical VDD | Notes | |---|---|---:|---:|---| | DDR | PC-3200 | 200–400 | 2.5 V | Original DDR; 184-pin DIMM | | DDR2 | PC2-6400 | 400–1066 | 1.8 V | 240-pin DIMM; 4n prefetch | | DDR3 | PC3-12800 | 800–2133 | 1.5 V | 240-pin DIMM; 8n prefetch; DDR3L at 1.35 V | | DDR4 | PC4-25600 | 1600–3200 | 1.2 V | 288-pin DIMM; bank groups | | DDR5 | PC5-44800 | 3200–8800 | 1.1 V | 288-pin DIMM; on-DIMM PMIC; two 32-bit subchannels | Data rates above are the broad JEDEC ranges per generation; retail XMP/EXPO kits often run above the base JEDEC bins. The values the SLeeLa classes carry are representative defaults a machine description can override with `setDataRate`. ## Module form factors - **DIMM** — desktop/server unbuffered or registered modules. - **SO-DIMM** — laptop/small-form-factor modules. - **RDIMM / LRDIMM** — registered / load-reduced server modules (buffered). ## Bus width and ECC A standard channel is **64 bits** of data. **ECC** modules add 8 check bits for a **72-bit** bus and detect/correct single-bit errors. `SLDDRModule.sized(mb, ecc)` selects 64- vs 72-bit accordingly. ## Bandwidth Peak transfer bandwidth ≈ data rate (MT/s) × channel width (bytes). For a single 64-bit DDR5-5600 channel: 5600 × 8 ≈ **44,800 MB/s** (hence `PC5-44800`). `SLDDRModule.peakBandwidthMBps()` computes this. ## Manufacturers DRAM die are produced by a small set of makers — **Samsung**, **SK Hynix**, and **Micron** (whose consumer brand is **Crucial**) — with module assembly also by **Kingston**, **Corsair**, **G.Skill**, and **Mushkin**. `SLDDRCatalog` exposes each by name. ## Mapping into the Sleela VM A module's capacity backs the VM's main memory. `SLDDRModule.wordsForWidth(bits)` converts the module's byte capacity into the VM memory-word count that `SLMachineModel` passes to `SLRAM.configure(...)`, so a named DDR part sizes the emulated machine's RAM.