# Hard Disk Drives — Specification (hdd) A hard disk drive stores data on rotating magnetic platters read by moving heads. `lib/operating-system/hdd` models the finite set of HDD variants by form factor, spindle speed, interface, recording technology, cache, and capacity. ## Spindle speed and performance | RPM | Typical use | Representative sustained transfer | |---:|---|---:| | 5400 | laptop / low-power / archival | ~180 MB/s | | 7200 | desktop / NAS / mainstream | ~260 MB/s | | 10000 | performance / enterprise | ~250 MB/s | | 15000 | enterprise transactional | ~300 MB/s | Rotational drives are bandwidth-competitive for sequential transfer but have millisecond-scale seek latency, which is the defining difference from an SSD. ## Interfaces - **SATA III** — 6 Gb/s, desktop/NAS. - **SAS** — 12 Gb/s, dual-port, enterprise. ## Recording technology - **CMR** (conventional magnetic recording) — non-overlapping tracks; preferred for predictable random-write performance. - **SMR** (shingled magnetic recording) — overlapping tracks for higher areal density, at the cost of slower random rewrites. ## Form factors - **3.5"** — desktop/NAS/enterprise capacity drives. - **2.5"** — laptop and some enterprise 10k/15k drives. ## Manufacturers The HDD market has consolidated to three makers: **Seagate** (IronWolf, Exos), **Western Digital** (WD Red/Gold/Blue), and **Toshiba** (N300, MG). All three are exposed by `SLHardDiskCatalog`. ## Mapping into the Sleela VM `SLHardDisk.capacityBlocks()` converts capacity + block size into the VM block count. When an HDD is the selected boot/bulk device, `SLMachineModel` hands that to the VM block store with `MEDIA_HDD` media, so the emulated machine uses rotational storage.