# x86 / x86-64 Specification ## General-purpose registers Legacy/compatibility programming exposes eight primary GPRs with multiple operand widths. In 64-bit mode the GPRs are 64-bit and R8-R15 are added. citeturn0search24turn0search28 | Resource | Legacy | 64-bit mode | |---|---:|---:| | Primary GPRs | 8 | 16 | | GPR width | up to 32-bit | 64-bit | | Instruction pointer | IP/EIP | RIP | | Flags | FLAGS/EFLAGS | RFLAGS | | Segment registers | present | architectural but largely reduced in 64-bit code/data use | ## Instruction encoding x86 instructions are variable length. Encoding may include prefixes, opcode bytes, ModR/M, SIB, displacement, and immediate fields. Intel documents instruction encoding and complete instruction references in Volume 2. citeturn0search6 SLeeLa therefore uses a variable-length decoder rather than the fixed-width decoder used by MIPS and PowerPC. ## Execution The architectural model includes: - integer arithmetic and logic; - shifts/rotates; - control transfer; - stack operations; - string operations; - memory operations; - privileged/system instructions; - x87/SSE/AVX families when enabled by the concrete profile; - exceptions and interrupts. ## Segmentation and paging Legacy x86 provides segmentation. Modern 64-bit mode substantially changes segment-limit behavior, while paging supplies linear-to-physical translation. AMD documents these 64-bit segmentation changes, and Intel documents paging structures and TLB caching. citeturn0search25turn0search26 ## Exceptions The system model includes faults, traps, aborts, hardware interrupts, software interrupts, descriptor-table state, privilege checks, and interrupt delivery. ## MSRs / control registers CR0-CR4, CR8 where applicable, debug registers, descriptor-table registers, MSRs, and model-specific state are represented separately from the general register file.