# ESA/390 Specification and Profile Contract ## Configuration Each machine profile must specify: - System/390 model and ESA/390 architecture level. - Supported addressing modes and enabled facilities. - Installed storage, translation configuration, and protection behavior. - Interrupt, timer, and channel configuration. - Strict behavior for unsupported operations. ## State model Represent sixteen 32-bit general-purpose registers and the architecture-defined control, access, floating-point, condition-code, and PSW state applicable to the selected profile. The 64-bit host type does not itself authorize 64-bit architectural operations. ## Execution contract 1. Decode only operations available in the configured ESA/390 profile. 2. Preserve architected instruction lengths, operand semantics, condition codes, and interruptions. 3. Route storage access through translation and protection checks. 4. Enforce privilege and addressing-mode constraints. 5. Model program, external, supervisor-call, and I/O interruption transitions. 6. Keep channel and device execution in the system model. ## Addressing and facilities ESA/390 supports architecture-specific addressing and translation facilities; the exact behavior must be selected by the named profile. z/Architecture-only 64-bit addressing and instructions remain disabled unless a separate architecture profile explicitly implements them. ## Error behavior Reject invalid configurations before execution. Unsupported opcodes or disabled facilities generate a modeled exception or structured diagnostic rather than silently succeeding.