# Sega Saturn (SH-2) Architecture ## Topology SLSaturnCPU -> SLClock -> SLRegisterFile -> SLALU -> SLInstructionDecoder -> SLIOBus -> SLIOTiming -> SLInterruptController ### Register section The architectural register section is a RISC general-purpose register file: Hitachi SH-2 register model (R0-R15, PC, SR, GBR, VBR); two SH-2 cores in parallel. Internal latches and datapath elements are modeled only where their observable timing or behavior is useful. ### Control section The control side is represented as: - instruction register; - instruction decode; - control/timing sequencer; - interrupt logic; - clock coordination. ### Datapath registers -> internal bus/latches -> ALU -> register/memory destination Address formation uses the architectural 32-bit address path. ### Bus The external interface exposes 32 address lines, a 32-bit data path, read/write control, clock/phase signals, and reset/interrupt controls. Each observable memory transaction is modeled as a bus event (see BUS.md). ## Design principle The SLeeLa representation is compositional: a Sega Saturn (SH-2) variant replaces only the couplers, I/O, timing, cache or opcode components that differ, rather than duplicating the whole CPU hierarchy. ## Sources - https://electronics.howstuffworks.com/dreamcast.htm - https://en.wikipedia.org/wiki/SuperH