Home /Modules/cpu/SPECIFICATION.md

SPECIFICATION.md

lib/cpu/sega-32x/SPECIFICATION.md · 75 line(s) · markdown

Sega 32X (SH-2) Specification

1. Identity

Model: Sega 32X (SH-2) Architecture class: 32-bit add-on CPU (dual SH-2) Data path: 32-bit Addressing: 32-bit external address space (4 GiB) Register model: RISC general-purpose register file

The profile exposes a programmer model while using the shared SLeeLa CPU objects (clock, register file, ALU, decoder, bus) to sequence each instruction.

2. Programmer-visible state

Hitachi SH-2 register model (R0-R15, PC, SR, GBR, VBR); two SH-2 cores.

The SLeeLa model stores these in SLRegisterFile and exposes 16 addressable register slots to the runnable model.

3. Address and data path

4. Clock

Rated model clock: about 23 MHz (overclockable in the model via setSpecClock).

The model records nominal frequency, cycle number, bus direction, and completion phase. Clock frequency is not instruction latency: one instruction may consume multiple cycles.

5. Execution model

The SLeeLa model sequences each instruction as:

  1. instruction fetch;
  2. opcode decode;
  3. operand/address acquisition;
  4. ALU/register operation;
  5. memory read/write;
  6. next-instruction transition.

6. Cache

cache coherence protocol: none

7. DMA

The processor/SoC integrates a DMA engine; SLeeLa may instantiate SLDMAController for it.

8. Interrupts

The model records interrupt request, recognition, vector/entry and timing through SLInterruptController without inventing undocumented internal behavior.

9. MMU/TLB

The base CPU has no MMU/TLB; address translation is CPU address -> external system address, and any mapping belongs to a surrounding system or later derivative.

10. Evidence labels

Sources