# PlayStation 3 (Cell / PowerPC) Architecture ## Topology SLPlayStation3CPU -> SLClock -> SLRegisterFile -> SLALU -> SLInstructionDecoder -> SLIOBus -> SLIOTiming -> SLInterruptController ### Register section The architectural register section is a RISC general-purpose register file: Power ISA PPE register model (32 GP, 32 FP, AltiVec) plus SPE array; Cell BE. Internal latches and datapath elements are modeled only where their observable timing or behavior is useful. ### Control section The control side is represented as: - instruction register; - instruction decode; - control/timing sequencer; - interrupt logic; - clock coordination. ### Datapath registers -> internal bus/latches -> ALU -> register/memory destination Address formation uses the architectural 42-bit address path. ### Bus The external interface exposes 42 address lines, a 64-bit data path, read/write control, clock/phase signals, and reset/interrupt controls. Each observable memory transaction is modeled as a bus event (see BUS.md). ## Design principle The SLeeLa representation is compositional: a PlayStation 3 (Cell / PowerPC) variant replaces only the couplers, I/O, timing, cache or opcode components that differ, rather than duplicating the whole CPU hierarchy. ## Sources - https://en.wikipedia.org/wiki/Cell_(processor) - https://en.wikipedia.org/wiki/Comparison_of_PlayStation_consoles