# Nintendo SNES (65C816) Architecture ## Topology SLSNESCPU -> SLClock -> SLRegisterFile -> SLALU -> SLInstructionDecoder -> SLIOBus -> SLIOTiming -> SLInterruptController ### Register section The architectural register section is a accumulator / indexed register machine: 65C816 programmer model (A, X, Y 8/16-bit, 16-bit SP, direct page, 24-bit PBR/addr). Internal latches and datapath elements are modeled only where their observable timing or behavior is useful. ### Control section The control side is represented as: - instruction register; - instruction decode; - control/timing sequencer; - interrupt logic; - clock coordination. ### Datapath registers -> internal bus/latches -> ALU -> register/memory destination Address formation uses the architectural 24-bit address path. ### Bus The external interface exposes 24 address lines, a 16-bit data path, read/write control, clock/phase signals, and reset/interrupt controls. Each observable memory transaction is modeled as a bus event (see BUS.md). ## Design principle The SLeeLa representation is compositional: a Nintendo SNES (65C816) variant replaces only the couplers, I/O, timing, cache or opcode components that differ, rather than duplicating the whole CPU hierarchy. ## Sources - https://en.wikipedia.org/wiki/Ricoh_5A22 - https://snes.nesdev.org/wiki/Timing