Home /Modules/cpu/ARCHITECTURE.md

ARCHITECTURE.md

lib/cpu/nintendo-gamecube/ARCHITECTURE.md · 49 line(s) · markdown

Nintendo GameCube (Gekko / PowerPC) Architecture

Topology

SLGameCubeCPU

-> SLClock -> SLRegisterFile -> SLALU -> SLInstructionDecoder -> SLIOBus -> SLIOTiming -> SLInterruptController

Register section

The architectural register section is a RISC general-purpose register file: PowerPC 750-class register model (32 GP, 32 FP) with on-chip L1/L2; IBM Gekko.

Internal latches and datapath elements are modeled only where their observable timing or behavior is useful.

Control section

The control side is represented as:

Datapath

registers -> internal bus/latches -> ALU -> register/memory destination

Address formation uses the architectural 32-bit address path.

Bus

The external interface exposes 32 address lines, a 32-bit data path, read/write control, clock/phase signals, and reset/interrupt controls. Each observable memory transaction is modeled as a bus event (see BUS.md).

Design principle

The SLeeLa representation is compositional: a Nintendo GameCube (Gekko / PowerPC) variant replaces only the couplers, I/O, timing, cache or opcode components that differ, rather than duplicating the whole CPU hierarchy.

Sources