MIPS Specification
Programmer-visible state
| Resource | Width | Count |
|---|---|---|
| General-purpose registers | 32-bit | 32 |
| PC | 32-bit | 1 |
| HI | 32-bit | 1 |
| LO | 32-bit | 1 |
| CP0 registers | implementation-defined control state | implementation-dependent |
GPR 0 is architecturally constant zero. Writes to it do not produce a persistent nonzero value.
Instruction formats
Classic MIPS uses fixed 32-bit instructions with R, I, and J encoding families.
SLeeLa keeps instruction decode separate from execution so fields can feed register selection, immediate generation, ALU control, memory control, and branch control.
Execution
The model includes:
- register-register ALU operations;
- immediate operations;
- loads and stores;
- conditional branches;
- jumps and jump-and-link;
- shifts;
- multiply/divide with HI/LO;
- system-control operations through CP0;
- exception and interrupt entry.
Pipeline
The base model represents the classic five conceptual stages:
- IF
- ID
- EX
- MEM
- WB
This is a functional timing abstraction, not a claim that every MIPS implementation physically used exactly five stages.
Branch delay
Classic MIPS executes the instruction in the branch delay slot. citeturn0search20
Privilege and CP0
CP0 contains privileged system state including status and exception-related state. MIPS documentation shows the CP0 Status register controlling interrupt, exception, privilege, and related operating state. citeturn0search19
Cache/MMU/DMA boundary
Cache and TLB organization are implementation-dependent. The base ISA description does not invent a particular cache size or TLB entry count. DMA is modeled as an external bus master unless a specific MIPS SoC/core documents otherwise.