# IBM POWER9 Registers The programmer-visible register model is a RISC general-purpose register file. **Registers:** Power ISA v3.0 register model (32 GP, 32 VSR), SMT4/SMT8, large on-chip L2/L3. The model exposes 32 addressable register slots backed by SLRegisterFile. No register slot is hardwired to zero in this architecture. ## Status / condition state Condition/zero/negative state is tracked by the model's flag fields (flagZ/flagN) and any architecture status register listed above. Flags are updated by ALU and compare operations. ## Internal state The physical device contains internal latches and buses used during address and data movement. SLeeLa promotes an internal element to a modeled register only when it affects bus visibility, cycle timing, interrupt restart, address formation, or instruction sequencing. ## Sources - https://en.wikipedia.org/wiki/POWER9 - https://en.wikipedia.org/wiki/Power_ISA