IBM POWER9 Architecture
Topology
SLIBMPower9CPU
-> SLClock -> SLRegisterFile -> SLALU -> SLInstructionDecoder -> SLIOBus -> SLIOTiming -> SLInterruptController
Register section
The architectural register section is a RISC general-purpose register file: Power ISA v3.0 register model (32 GP, 32 VSR), SMT4/SMT8, large on-chip L2/L3.
Internal latches and datapath elements are modeled only where their observable timing or behavior is useful.
Control section
The control side is represented as:
- instruction register;
- instruction decode;
- control/timing sequencer;
- interrupt logic;
- clock coordination.
Datapath
registers -> internal bus/latches -> ALU -> register/memory destination
Address formation uses the architectural 52-bit address path.
Bus
The external interface exposes 52 address lines, a 64-bit data path, read/write control, clock/phase signals, and reset/interrupt controls. Each observable memory transaction is modeled as a bus event (see BUS.md).
Design principle
The SLeeLa representation is compositional: a IBM POWER9 variant replaces only the couplers, I/O, timing, cache or opcode components that differ, rather than duplicating the whole CPU hierarchy.
Sources
- https://en.wikipedia.org/wiki/POWER9
- https://en.wikipedia.org/wiki/Power_ISA