# Cortex-M Registers ## Core registers - R0-R12: general-purpose registers. - SP: active stack pointer; MSP is used in Handler mode. PSP is available where implemented and selected for Thread mode. - LR: link register, including architecture-defined exception-return encodings. - PC: program counter, with execution semantics defined by the selected Thumb profile. - xPSR: combined program status view including condition flags, execution state, and exception number fields as architecturally defined. ## Special registers CONTROL, PRIMASK, BASEPRI, FAULTMASK, IPSR, MSP, PSP, and other special registers are profile- and privilege-dependent. BASEPRI and FAULTMASK, for example, are not available identically on all baseline profiles. Implement access checks rather than exposing every register universally. ## Optional register banks - FPU: floating-point registers and FPSCR only if the FPU is present and enabled. - ARMv8-M security: Secure/Non-secure banked stack pointers and relevant special state where implemented. - MPU: region and control registers according to the implementation. - Debug/trace: implementation-defined registers and access restrictions. ## Modeling requirements 1. Keep register width and reset values in the selected profile/implementation definition. 2. Implement read/write side effects for special registers. 3. Enforce privilege and security attribution restrictions. 4. Preserve architecturally defined reserved-bit behavior; do not invent meanings for reserved bits. 5. Record unknown or vendor-specific register behavior as `unspecified` until configured.