# Atari Lynx (65C02 / Mikey) Architecture ## Topology SLAtariLynxCPU -> SLClock -> SLRegisterFile -> SLALU -> SLInstructionDecoder -> SLIOBus -> SLIOTiming -> SLInterruptController ### Register section The architectural register section is a accumulator / indexed register machine: 65C02 programmer model (A, X, Y, S, PC, P) with the Mikey/Suzy custom chips. Internal latches and datapath elements are modeled only where their observable timing or behavior is useful. ### Control section The control side is represented as: - instruction register; - instruction decode; - control/timing sequencer; - interrupt logic; - clock coordination. ### Datapath registers -> internal bus/latches -> ALU -> register/memory destination Address formation uses the architectural 16-bit address path. ### Bus The external interface exposes 16 address lines, a 8-bit data path, read/write control, clock/phase signals, and reset/interrupt controls. Each observable memory transaction is modeled as a bus event (see BUS.md). ## Design principle The SLeeLa representation is compositional: a Atari Lynx (65C02 / Mikey) variant replaces only the couplers, I/O, timing, cache or opcode components that differ, rather than duplicating the whole CPU hierarchy. ## Sources - https://en.wikipedia.org/wiki/Atari_Lynx - https://en.wikipedia.org/wiki/WDC_65C02