# Atari Jaguar (68000 + Tom/Jerry RISC) Architecture ## Topology SLAtariJaguarCPU -> SLClock -> SLRegisterFile -> SLALU -> SLInstructionDecoder -> SLIOBus -> SLIOTiming -> SLInterruptController ### Register section The architectural register section is a CISC named/split register set: 68000 register model (D0-D7, A0-A7, PC, SR) as the manager CPU plus Tom/Jerry RISC cores. Internal latches and datapath elements are modeled only where their observable timing or behavior is useful. ### Control section The control side is represented as: - instruction register; - instruction decode; - control/timing sequencer; - interrupt logic; - clock coordination. ### Datapath registers -> internal bus/latches -> ALU -> register/memory destination Address formation uses the architectural 24-bit address path. ### Bus The external interface exposes 24 address lines, a 32-bit data path, read/write control, clock/phase signals, and reset/interrupt controls. Each observable memory transaction is modeled as a bus event (see BUS.md). ## Design principle The SLeeLa representation is compositional: a Atari Jaguar (68000 + Tom/Jerry RISC) variant replaces only the couplers, I/O, timing, cache or opcode components that differ, rather than duplicating the whole CPU hierarchy. ## Sources - https://en.wikipedia.org/wiki/Atari_Jaguar - http://atarijaguar.freeservers.com/hardware.htm