# AMD Ryzen Threadripper 9000 (Zen 5 x86-64) Architecture ## Topology SLAMDThreadripperCPU -> SLClock -> SLRegisterFile -> SLALU -> SLInstructionDecoder -> SLIOBus -> SLIOTiming -> SLInterruptController ### Register section The architectural register section is a CISC named/split register set: x86-64 register model (Zen 5 microarchitecture) with per-core L1/L2 and shared L3 per CCD, aggregated across multiple CCDs on a central I/O die. Internal latches and datapath elements are modeled only where their observable timing or behavior is useful. ### Control section The control side is represented as: - instruction register; - instruction decode; - control/timing sequencer; - interrupt logic; - clock coordination. ### Datapath registers -> internal bus/latches -> ALU -> register/memory destination Address formation uses the architectural 48-bit address path. ### Bus The external interface exposes 48 address lines, a 64-bit data path, read/write control, clock/phase signals, and reset/interrupt controls. On the physical part, off-die I/O is DDR5 (4-channel HEDT, 8-channel PRO) plus PCIe 5.0. Each observable memory transaction is modeled as a bus event (see BUS.md). ## Design principle The SLeeLa representation is compositional: an AMD Ryzen Threadripper 9000 variant replaces only the couplers, I/O, timing, cache or opcode components that differ, rather than duplicating the whole CPU hierarchy. The HEDT (X) and workstation (PRO WX) sub-families differ in memory channels, PCIe lane count and maximum core/CCD count, not in the core programmer model. ## Sources - https://en.wikipedia.org/wiki/Zen_5 - https://en.wikipedia.org/wiki/Ryzen_Threadripper - https://en.wikipedia.org/wiki/List_of_AMD_Ryzen_processors