# 6502 Specification ## 1. Identity **Model:** MOS Technology 6502 **Family:** MOS 6500 series **Architecture class:** 8-bit microprocessor **Addressing:** 16-bit external address bus **Base profile:** original NMOS 6502 The 6502 exposes a compact programmer model while using internal latches, buses and control logic to sequence each instruction. ## 2. Programmer-visible state | Register | Width | Purpose | |---|---:|---| | A | 8 | accumulator | | X | 8 | index register | | Y | 8 | index register | | S | 8 | stack pointer | | PC | 16 | program counter | | P | 8 | processor status representation | The hardware status representation has seven meaningful flags: N, V, B, D, I, Z and C. Bit 5 is treated specially rather than as an ordinary writable flag. ## 3. Address and data path - Data path: 8 bits. - Address path: 16 bits. - Little-endian multi-byte addresses. - 64 KiB directly addressable space. - Stack occupies page $0100-$01FF in the programmer model. - Zero page occupies $0000-$00FF. ## 4. Clock The original 6502 uses a two-phase clocking scheme. External systems commonly describe the phases as phi1 and phi2. SLeeLa records: - nominal clock frequency; - clock phase; - bus cycle number; - read/write direction; - address; - data; - interrupt/wait condition; - completion phase. Clock frequency must not be confused with instruction latency. A single instruction may consume multiple bus cycles. ## 5. Execution model The 6502 does not use a modern out-of-order or superscalar pipeline. Instruction work is sequenced through control logic and repeated bus operations. The SLeeLa model therefore represents: 1. instruction fetch; 2. opcode decode; 3. operand/address acquisition; 4. ALU/register operation; 5. memory read/write; 6. prefetch/next-cycle transition. ## 6. Cache Base 6502: - L1 instruction cache: none - L1 data cache: none - L2: none - L3: none - cache coherence protocol: none Every memory access is modeled against the external memory/bus interface. ## 7. DMA The base CPU has no integrated DMA controller. DMA in a 6502 system is an external-system function. SLeeLa therefore leaves SLDMAController uninstantiated for the base profile while permitting a system-level DMA component to couple to the CPU bus. ## 8. Interrupts The architectural model includes: - IRQ: maskable interrupt request; - NMI: non-maskable interrupt; - RESET: reset sequence. The interrupt controller model records request, recognition, vector fetch and entry timing without inventing undocumented internal transistor behavior. ## 9. MMU/TLB The original 6502 has no MMU or TLB. Address translation is therefore: CPU address -> external system address Any banking, mapping or protection belongs to a surrounding system or a later 6500-family derivative. ## 10. Evidence labels - documented: directly stated by a hardware/reference source. - derived: mechanically calculated from documented properties. - estimated: engineering approximation, never presented as silicon fact. - unspecified: deliberately left unknown. This profile uses those labels to keep architectural modeling separate from speculation. ## Sources - MAME 6502 family technical specification: https://github.com/mamedev/mame/blob/master/docs/source/techspecs/m6502.rst - Visual6502 datapath archive: https://tinymachines.ai/6502/archive/wiki/6502_datapath.html - 6502 specification reference: https://tutorial-6502.sourceforge.io/specification/