6502 Architecture
Topology
SL6502CPU
-> SLClock -> SLRegisterFile -> SLPipeline (cycle sequencer, not a modern pipeline) -> SLInstructionFetch -> SLExecutionUnit -> SLIOBus -> SLIOTiming -> SLInterruptController
Register section
The architectural register section contains:
- A
- X
- Y
- S
- P
- PC high/low
The physical implementation also uses internal latches and data/address-path elements. SLeeLa models those only where their observable timing or behavior is useful.
Control section
The control side is represented as:
- instruction register;
- instruction decode;
- control/timing sequencer;
- interrupt logic;
- clock-phase coordination.
The original 6502 is associated with PLA-based direct instruction decoding rather than a conventional modern microcode engine.
Datapath
The major conceptual datapath elements are:
registers -> internal bus/latches -> ALU -> register/memory destination
Address formation uses high/low address components and indexed addressing logic.
Bus
The external interface exposes:
- 16 address lines;
- 8 data lines;
- read/write control;
- clock/phase signals;
- reset and interrupt controls.
Each observable memory transaction is modeled as a bus event.
Design principle
The SLeeLa representation is intentionally compositional. A 6502 variant can replace only the couplers, I/O, timing, or opcode-specific components that differ rather than duplicating the entire CPU hierarchy.
Source: https://github.com/mamedev/mame/blob/master/docs/source/techspecs/m6502.rst