#sleela 1.7 // ADVANCED: check a multi-AP 2.4 GHz channel plan for co-channel and adjacent // (overlapping) interference. In the 2.4 GHz band each channel is 20 MHz wide // but channels are spaced only 5 MHz apart, so two APs interfere unless their // channel numbers differ by at least 5. The classic non-overlapping set is // {1, 6, 11}. We verify a plan the way a site survey tool would. No radio used. class AP { String name; int channel; } class ADVNonoverlapPlan { static AP[] plan; AP ap(String name, int channel) { AP a = new AP(); a.name = name; a.channel = channel; return a; } int gap(int a, int b) { int d = a - b; if (d < 0) d = 0 - d; return d; } void main() { // A plan with a conflict: AP-C on channel 4 overlaps AP-A on channel 1. plan = new AP[4]; plan[0] = ap("AP-A", 1); plan[1] = ap("AP-B", 6); plan[2] = ap("AP-C", 4); plan[3] = ap("AP-D", 11); int conflicts = 0; int i = 0; while (i < arrayLength(plan)) { int j = i + 1; AP ai = plan[i]; while (j < arrayLength(plan)) { AP aj = plan[j]; int g = gap(ai.channel, aj.channel); if (g < 5) { print("conflict: " + ai.name + "(ch " + ai.channel + ") and " + aj.name + "(ch " + aj.channel + ") -- separation " + g + " < 5"); conflicts = conflicts + 1; } j = j + 1; } i = i + 1; } print("access points = " + arrayLength(plan)); print("interfering pairs = " + conflicts); if (conflicts == 0) print("plan is clean (non-overlapping)"); if (conflicts > 0) print("fix: move conflicting APs onto {1, 6, 11}"); } }